36015

Yaesu FT-7800 Manual

54
Zoom out
Zoom in
Previous page
1/80
Next page
52 FT-7800R OPERATING MANUAL
CW Identifier Setup
The ARTS feature includes a CW identifier, as discussed previously. Every ten minutes
during ARTS operation, the radio can be instructed to send “DE (your callsign) K” if this
feature is enabled. The callsign field may contain up to 6 characters.
Here’s how to program the CW Identifier:
1. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #8 (CW WRT).
3. Press the
[
BAND
(
SET
)]
key momentarily.
4. Press the
[
BAND
(
SET
)]
key momentarily again to en-
able entry of your callsign.
5. Rotate the DIAL knob one click clockwise to begin en-
try of the letters and numbers in your callsign.
6. Press the
[
BAND
(
SET
)]
key momentarily to set the first
letter or number in your callsign.
7. When the correct character has been selected, press the
[
BAND
(
SET
)]
key momentarily to move on to the next
character.
8. Repeat steps 6 and 7 as many times as necessary to com-
plete your callsign.
9. Press the
[
SCAN
(
SEL
)]
key to delete all data after the
cursor that may have been previously stored (errone-
ously).
10.When you have entered your entire callsign, press and hold in the
[
BAND
(
SET
)]
key
for 1/2 second to confirm the callsign, then press and hold in the
[
BAND
(
SET
)]
key for
1/2 second to exit to normal operation.
11.Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second
to enter the Set mode again, then rotate the DIAL knob
to select Menu #7 (CWID).
12.Press the
[
BAND
(
SET
)]
key momentarily, then rotate
the DIAL knob to select “TX ON” (to enable the CW
identifier).
13.Press the
[
BAND
(
SET
)]
key momentarily to save the new setting, then press and hold in
the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
ARTS
™
: AUTO RANGE TRANSPONDER SYSTEM
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-7800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-7800 in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info