674722
32
Zoom out
Zoom in
Previous page
1/56
Next page
DR-2X / DR-2XE Operating Manual30
13. Voice messages
Voice messages are a very useful feature to communicate messages to all club members. For example, when
you plan a breakfast meeting on Sunday morning, if you record the location and time with the remote control,
the message is transmitted from the repeater at a predetermined interval and number of times. For example,
it is possible to set the message to announce ten times at an hourly interval.
Voice Message for C4FM Digital Mode
Remote control voice message using FTM-400D, FTM-100D or FTM-3200D
Recording, playback, and erasing are performed with the “PTT” “P2” “P3” keys of the transceiver’s microphone.
In order to record a message, first register the transceiver DP-ID on the DR-2X/DR-2XE repeater.
1 Tune the transmit frequency to the uplink frequency of the CH-B side of the DR-2X/DR-2XE.
2 Set the transceiver to the C4FM digital mode, then press and hold the “” key on the microphone.
To record a message:
Press the PTT to record. When you release the PTT, recording will end automatically and “REC
Completed” will be displayed on the screen of the mobile transceiver.
Recording is possible for a maximum of 60 seconds.
To play and transmit the message:
Press the P2 key. The message will transmit once and “PLAY Completed” will be displayed on the screen
of the mobile transceiver.
To erase a recorded message:
When the P3 key is pressed, the recorded contents are deleted and “CLEAR Completed” is displayed on
the screen of the mobile transceiver.
3 Press the “” key on the microphone to return to the normal operation.
Voice Message for Analog FM
Send 4-digit DTMF codes from the transceiver's microphone to record, play, or erase a voice message.
1 Tune the transmit frequency to the uplink frequency of the CH-B side of the DR-2X/DR-2XE.
2 Set the transceiver to the analog FM mode.
To record a message:
While transmitting, press the “” key, then input the preset 4-digit command (initial value 5555) from
the microphone. When the PTT is released, a CW code of “R” is sent on the downlink frequency. Press
the PTT to record. When you release the PTT, recording stops automatically, and the CW code of “R” is
transmitted on the downlink frequency.
z If a CW code of “NG” is returned when recording starts, the recording area of the FVS-2 is full. Execute the erase
operation to clear the internal memory area.
z Recording is possible for a maximum of 60 seconds.
To play and transmit the message:
While transmitting, press the “” key, then input the preset 4-digit command (initial value 6666) from the
microphone. Once the message is transmitted, a CW code of “R” is sent on the downlink frequency.
To erase a recorded message:
While transmitting, press the “” key, then input the preset 4-digit command (initial value 7777) from
the microphone. The recorded content is erased and the CW code of “R” is transmitted at the downlink
frequency.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu DR-2X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu DR-2X in the language / languages: English as an attachment in your email.

The manual is 14,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info