674722
31
Zoom out
Zoom in
Previous page
1/56
Next page
DR-2X / DR-2XE Operating Manual 29
12. Actual remote control procedure
Remote Control for C4FM Digital
When controlling remotely with the FTM-400D
1 Please confirm that the FTM-400D DP-ID is registered on the DR-2X/DR-2XE repeater.
2
Tune the transmit frequency of the FTM-400D to the uplink frequency of the CH-B side of the DR-2X/DR-2XE.
3 Set the FTM-400D to the digital mode, then press and hold the “” key on the microphone (MH-48A6JA).
4 “REMOTE REC/PLY” is displayed on the top of the FTM-400D screen, the remote-control is available.
To cancel the remote-control, press the “” key on the microphone (MH-48A6JA).
5 Input the 4-digits remote command by using the numeric keys (MH-48A6JA).
Press the “” key on the microphone (MH-48A6JA) to cancel the input command at any point in the process.
6 Press the “#” key on the microphone (MH-48A6JA) to transmit the input command.
7 After transmitting the command, press the “” key on the microphone (MH-48A6JA) to return to the normal
operation.
z If the FTM-400D firmware is not compatible with the DP-ID function, update to the latest firmware to use the DP-ID
function.
z The latest firmware is available on the YAESU website.
When controlling remotely with the FTM-100D
1 Please confirm that the FTM-100D DP-ID is registered on DR-2X/DR-2XE repeater.
2
Tune the transmit frequency of the FTM-100D to the uplink frequency of the CH-B side of the DR-2X/DR-2XE.
3 Set the FTM-100D to the digital mode, then press and hold the “” key on the microphone (MH-48A6JA).
4 “REC/PLY” is displayed on the top of the screen of the FTM-100D, the remote-control is available.
Cancelling the remote-control, press the “” key on the microphone (MH-48A6JA).
5 Input the 4-digits remote command by using the numeric key (MH-48A6JA).
Press the “” key on the microphone (MH-48A6JA) to cancel the input command at any point in the process.
6 Press the “#” key on the microphone (MH-48A6JA) to transmit the input command.
7 After transmitting the command, press the “” key on the microphone (MH-48A6JA) to return to the normal
operation.
z If the FTM-100D firmware is not compatible with the DP-ID function, update to the latest firmware to use the DP-ID
function.
z The latest firmware is available on the YAESU website.
When controlling remotely with the FTM-3200D
1 Please confirm that the FTM-3200D DP-ID is registered on DR-2X/DR-2XE repeater.
2
Tune the transmit frequency of the FTM-3200D to the uplink frequency of the CH-B side of the DR-2X/DR-2XE.
3 Set the FTM-3200D to the digital mode, then press and hold the “” key on the microphone (MH-48A6JA).
4 “REMOTE” is displayed on the screen of the FTM-3200D, the remote-control is available.
Cancelling the remote-control, press the “” key on the microphone (MH-48A6JA).
5 Input the 4-digits remote command by using the numeric key (MH-48A6JA).
Press the “” key on the microphone (MH-48A6JA) to cancel the input command at any point in the process.
6 Press the “#” key on the microphone (MH-48A6JA) to transmit the input command.
7 After transmitting the command, press the “” key on the microphone (MH-48A6JA) to return to the normal
operation.
z If the FTM-3200D firmware is not compatible with the DP-ID function, update to the latest firmware to use the DP-ID
function.
z The latest firmware is available on the YAESU website.
Remote Control for Analog FM
Transmit the 4-digit DTMF codes from the transceiver to perform remote control.
1 Tune the transmit frequency to the uplink frequency of the CH-B side of the DR-2X/DR-2XE.
2 Set the transceiver to the analog FM mode.
3 While transmitting, press the “” key on the microphone, and then use the numeric keys to input the preset
4-digit remote command.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu DR-2X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu DR-2X in the language / languages: English as an attachment in your email.

The manual is 14,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info