610842
60
Zoom out
Zoom in
Previous page
1/63
Next page
52
Problem Solving
Printing Solution Chart
Problem Probable Cause Remedy
The
WorkCentre
does not print
The IEEE-1284 Parallel
cable is not connected
properly.
Check the cable connection.
The IEEE-1284 parallel
cable is defective.
Check the cable with a
computer and printer that
work. If printing is still not
possible, replace the cable.
The port setting is
incorrect.
Check the printer settings in
the Windows Control Panel to
make sure that the print job is
being sent to the correct port.
(For Example: LPT1.)
The toner and drum
cartridges are not installed
properly.
Check that the toner and
drum cartridges are installed
properly.
The printer driver may not
be installed properly.
Reinstall the WorkCentre
printing software.
The parallel port cable
specifications may not be
correct.
Use the IEEE-1284 parallel
port cable supplied with the
machine or replace it with an
IEEE-1284 compliant cable.
Half of the
page is blank
The page layout is too
complex.
Reduce the resolution setting
from 600 dpi to 300 dpi.
Install more RAM in the
computer.
The page orientation may
be incorrect.
Change the page orientation
in the printer setup dialog.
There may be too many
applications open.
Try closing other applications
before printing.
Reduce resolution from
600 dpi to 300 dpi.
Install more RAM in the
computer.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre XD 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre XD 100 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info