610821

Xerox WorkCentre 5955 Manual

714
Zoom out
Zoom in
Previous page
1/720
Next page
General Care and Troubleshooting WorkCentre
®
5945/5955
712 User Guide
The finisher does not staple or hole punch correctly
• To correct stapling problems, ensure the maximum number of sheets is not exceeded for the
finisher and weight of paper being used.
• Check the correct option has been selected on the touch screen.
• Check the touch screen for a fault message indicating no staples or a staple jam. Replace the
staple cartridge or clear the jam.
• When using large paper, remove any output contained in the Stacker Tray.
• Check that the hole punch waste container is not full. The hole punch waste container collects
waste from the hole punch.
• Check the correct paper size has been selected for the paper loaded in the tray.
• Check the paper tray guides are locked into position against the paper.
• Check the correct paper type, such as the weight, has been selected for the paper loaded in the
tray.
More Information
Loading Tray 1 and Changing the Tray Settings
Loading Tray 2 and Changing the Tray Settings
Loading Tray 3
Loading Tray 4
Loading the Bypass Tray and Changing the Tray Settings
Replacing the Staple Cartridge in the Office Finisher
Replacing the Staple Cartridges in the New Office Finisher Booklet Maker
Replacing the Staple Cartridge in the Convenience Stapler
Emptying the Hole Punch Waste
Stray marks or black marks from hole punched originals are not removed
• Use the Edge Erase option to erase the edge with the punched holes.
• Copy from the document glass with the document feeder down.
More Information
Erasing Edges from Copies
Pages are out of sequence or upside down when the Booklet Creation feature
is used
• Ensure that the originals are in the correct sequence.
• Feed LEF originals to SEF orientated paper.
• Enable the display options for Booklet Creation and ensure that the correct sequence is
selected (i.e. Left to Right or Right to Left).
Note: SEF is Short Edge Feed (where the short edge of the paper is the leading edge when the paper
is fed into the device). LEF is Long Edge Feed (where the paper is oriented so that the long edge is
fed into the device first).
More Information
Preparing Copies to be made into a Booklet
Creating a Booklet Layout using the PCL Print Driver
Creating a Booklet Layout using the PostScript Print Driver
… 714 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 5955 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 5955 in the language / languages: English as an attachment in your email.

The manual is 6,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 5955

Xerox WorkCentre 5955 User Manual - German - 764 pages

Xerox WorkCentre 5955 User Manual - Dutch - 774 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info