540334

Wyse - Dell VX0 Manual

1
Zoom out
Zoom in
Previous page
1/3
Next page
Model VX0 Mounting Bracket
Installation Instructions
The mounting bracket can be mounted vertically on a wall or horizontally under most
desks. The bracket can be mounted with the power supply holder either in the up or down
position when vertical or on the left or right when horizontal, for a total of four available
mounting positions. The thin client can be inserted with either the power button positioned
towards the top or to the right. Cables can be attached at any convenient time, as long as
the power is disconnected. The mounting bracket must be mounted vertically or
horizontally using four (4) user-provided #10 screws into a sturdy support such as a wall
brace or solid desk.
Note
If installing on a hollow wall, any standard anchoring method may be used,
such as screws, butterfly anchors, or expansion bolts.
Use the following instructions to mount the thin client.
1. Remove thumb screw from the vertical foot base, slide foot toward the back panel and
remove the foot.
2. Use the mounting bracket as a template to mark the positions of the mounting holes.
Notes
When determining location, take into account the cable lengths of the
monitor, keyboard, mouse, power supply, and peripherals.
For thin client cooling requirements, position the thin client so that the power
button to the thin client is on the top when installing in the vertical position
and to the right facing you when installing in the horizontal position under a
desk.
Mount the thin client only as indicated; improper orientation (where the back
panel or front panel is facing down) could inhibit the dissipation of heat from
the device and damage it.
Leave at least 12.5 mm between the ventilation holes of the thin client and
any solid surface. An enclosed area must have a minimum of 150 square cm
of venting or other open area to maintain proper ventilation of the thin client.
.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wyse - Dell VX0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wyse - Dell VX0 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info