540332
1
Zoom out
Zoom in
Previous page
1/5
Next page
Mounting Bracket Installation
Instructions for Winterm
Thin Clients, Model SX0
The SX0 products include the S10, S30, S50, and S90 thin clients that can easily be
mounted vertically on a wall, horizontally under most desks, or mounted on most VESA
standard monitors using the Model SX0 mounting bracket. The bracket can be mounted
with the power supply holder either in the up or down position when vertical or the left or
the right when horizontal, for a total of four available mounting positions. The thin client
can be inserted with either the power button positioned towards the top or to the right.
Cables can be attached at any convenient time, as long as the power is disconnected. The
mounting bracket must be mounted vertically or horizontally using four (4) user-provided
#10 screws into a sturdy support such as a wall brace or solid desk. For flat-screen
monitor mounting, four (4) M4x10 mm mounting screws are provided.
Note
If installing on a hollow wall, any standard anchoring method may be used,
such as screws, butterfly anchors, or expansion bolts.
Notes
For flat-screen monitor mounting:
The bracket may need to be mounted horizontally with the connectors facing
down and the power button up, on the right or left.
Check with your monitor’s manufacturer for proper screw size and length
before assembling. If the four (4) M4x10 mm screws provided are not correct
for your bracket-to-monitor mounting requirements, user is to provide the
proper replacement.
Wall and Under-Desk Mounting Configuration
Use these instructions to mount the thin client vertically on a wall or horizontally under
most desks.
1. Remove the four horizontal feet from the thin client by sliding the feet towards the back
panel.
2. Use the mounting bracket as a template to mark the positions of the mounting holes
(see Figure 1).
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wyse - Dell SX0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wyse - Dell SX0 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info