724654
13
Zoom out
Zoom in
Previous page
1/16
Next page
2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
(toll free)
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
e-mail: help@powertoolsupport.com1800 909 909
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
22 23
Operation Maintenance
This should ensure the locking pin on the exible hose (17) aligns with the
ridge in the exible hose outlet – blowing (8). Rotate the exible hose (17)
to the left to secure the hose into position (Fig AF)
3. Select and attach additional extension tubes if required (Refer page 16).
4. Before turning ON, ensure you are rmly holding the end of the exible
hose (17), or extension tube/s (18) if added (Fig AF).
5. Press the “I” on the
ON/OFF Switch (3)
to turn ON (Fig AG).
To turn OFF, press the
“O on the ON/OFF
switch (Fig AH).
AH.AG.
Cleaning
WARNING! You must pull out the power plug from the mains outlet
before commencing any cleaning, maintenance or inspection work
procedures on the appliance.
Keep all safety devices, air vents and the motor housing and appliance
head (2) free of dirt and dust.
We recommend that you clean and dry the appliance immediately after
each use.
Cleaning the Appliance Head
Clean the appliance head (2) regularly with a damp cloth and some soap
followed by wiping down and drying before storing away.
Do not submerse the appliance head (2) in water or allow water to enter
the appliance head (2).
Do not use cleaning agents or solvents. These may be aggressive to the
plastic parts on the appliance.
Cleaning the Tank
The tank (10) can be cleaned with a damp cloth and soap or rinsed under
running water depending on the amount of dirt. Wipe down and dry
before storing away.
Cleaning the HEPA Filter
Clean the HEPA lter (16) regularly by carefully patting it and cleaning it
with a ne brush or hand brush (not supplied).
Do not submerse the HEPA lter in water. Do not use a damp cloth to
clean.
Cleaning the Foam Filter
Clean the foam lter (19) with a little soap under running water.
Allow the foam lter (19) to completely air-dry before reinstalling or
storing away. Do not wring dry.
Check the Floating Safety Valve
Check the oating safety valve (15) often to ensure it moves freely within
the lter basket (14). To do this, take the appliance head (2) by the handle
and tip it carefully so that the lter basket (14) is facing upwards. The
oating safety valve (15) should move freely up and down.
General Maintenance
Before each use, inspect the general condition of the appliance and check
for the following:
Loose hardware or screws.
Misalignment or binding of moving parts.
Damaged or electrical wiring.
Check lters are securely tted.
Damaged or cracked tank.
Any other condition that may aect safe operation
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualied persons in order to avoid a hazard.
Maintenance
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone MWW706S-35L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone MWW706S-35L in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info