697462
10
Zoom out
Zoom in
Previous page
1/12
Next page
10
Environmental protection and disposal
CS200 – 6720830474 (2015/06)
display. If the fault is still active, it can be restored to the display
by pressing the Back key.
The cause can be a fault on the solar controller, in a component,
in an assembly or on the heat source.
The solar system keeps operating as far as possible.
If 0 is displayed constantly in the info menu under solar yield
even though the solar system is in operation, the solar system is
incorrectly commissioned:
Contact installer to check the settings on the solar
controller.
Table 7 Fault displays with fault code A11
If a fault persists:
Contact your installer or Worcester Bosch service
department.
Submit the fault code, sub-code, as well as the ID no. of the
solar controller.
Table 8 Your installer must enter the ID no. of the solar
controller here during installation.
8 Environmental protection and disposal
Environmental protection is a key commitment of the Bosch
Group.
Quality of products, efficiency and environmental protection
are equally important objectives for us. Laws and requirements
aimed at protecting the environment are strictly observed.
In order to protect the environment, we use the best possible
technology and materials within the constraints of economic
considerations.
Packaging
Where packaging is concerned, we participate in country-
specific recycling processes that ensure optimum recycling.
All of our packaging materials are environmentally compatible
and can be recycled.
Old electrical and electronic appliances
Electrical or electronic devices that are no longer
serviceable must be collected separately and sent
for environmentally compatible recycling (in
accordance with the European Waste Electrical
and Electronic Equipment Directive).
To dispose of old electrical or electronic devices, you should
use the return and collection systems put in place in the country
concerned.
Batteries must not be disposed together with your household
waste. Used batteries must be disposed of in local collection
systems.
Fault code - sub-code - [cause or fault description]
Nothing appears on the display
Test procedure / Cause Corrective measure
System is switched off. Switch on the system.
The power supply to the
solar controller has been
interrupted.
Check that the solar
controller is correctly
seated in its wall mounting
bracket.
Module is not set to position
10.
Contact your installer.
A11 - 1010 - [No communication via BUS interface EMS 2]
Test procedure / Cause Corrective measure
Check that the solar
controller is correctly
seated in its wall mounting
bracket.
A11 - 1038 - [No communication with solar module]
Test procedure / Cause Corrective measure
Date/time not yet set Set date/time.
Prolonged loss of power
supply
Avoid voltage failures.
A11 - 6004 - [No communication with solar module]
Test procedure / Cause Corrective measure
Check that the solar
controller is correctly
seated in its wall mounting
bracket.
__ _
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester-Bosch CS 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch CS 200 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worcester-Bosch CS 200

Worcester-Bosch CS 200 Installation Guide - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info