11.Table of Parameters12.Instructions of seat assembly (accessory not included)
1. Seat components a, b, c 2. Insert seat post b into seat a 3.Make seat post b vertical to seat a,
and tighten it with a wrench.
4.Insert the seat into seat tube c, and
tighten the screw rod and press down
the seat clamp as shown in the figure.
5.The seat assembly is completed 6.Insert the assembled seat bottom
into the hole on the foot rest of the
scooter.
7.Open the safety ring. 8.Pull open the fixed handle, and
move the seat post downward.
1. The maximum cruising speed is measured at the temperature of25℃, payload of 60kg, full electric voltage and flat pavement. Factors like driving habit,
environmental temperature, road surface condition, payload etc. will affect the max speed.
2. The traveling range is measured at the temperature of25℃, about 15km/h, the payload of60 kg and flat pavement. Factors like driving habit,
environmental temperature, road surface condition, payload etc. will affect the continuous travel mileage.
3. The gradeability is measured at the temperature of25℃, the payload of60 kg. Factors like driving habit, environmental temperature, payload etc. will affect
max gradeability
9.Tighten screw with a hexagonal
wrench.
10.Fasten the fixed handle. 11.Lock the safety ring. 12.Seat assembly completed.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Wilfa E2 Pro at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Wilfa E2 Pro in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.
The manual is 9.58 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
