THANK YOU FOR PURCHASING A WHIRLPOOL
To receive more comprehensive help and support, please
register your product at www.whirlpool.eu/register
You can download the Safety Instructions and
the Use and Care Guide by visiting our website
docs.whirlpool.e u and following the
instructions on the back of this booklet.
Before using the appliance carefully read the Health and Safety guide.
Door filter (behind
7. Bottom filter (behind
8. Adjustable feet (4)
1. On/Off button (Reset if
2. Programme button
3. Settings button
4. Key lock
5. Steam option
6. Knob (Turn to select /
Press to confirm)
7. Finish in
8. Drying time
9. Dryness level
10. Options button
11. Start / Pause button
FIRST TIME USE
BEFORE USING THE DRYER
CHECK DRAIN HOSE AND WATER TANK
Make sure that the drain hose on the back of the dryer is fixed
correctly, either to the dryer’s water tank, or to your domestic
sewage system (see Installation guide).
Make sure that the water tank is correctly inserted.
When switching on the dryer for the first time, you will be asked to
• Set the desired language
• Adapt the value for your local water conductivity
• Set the dryer to recall the last used programme setting or not when switching it on.
Refer to HINTS AND TIPS and OPTIONS, FUNCTIONS AND INDICATORS / Settings.
See Use and Care Guide for more details on functions / see last page for
information on how to obtain the Use and Care Guide
Make sure that no lighters or
Make sure that the laundry is
matches remain in the laundry. not soaked with flammable
1. LOAD LAUNDRY
• Prepare your laundry according to the
recommendations in section “HIN ...
4. SET THE DESIRED PROGRAMME
GUIDED MODE - the button light will guide you through setting
your programme in the following order: selection of programme /
drying time (ONLY if Drying time or Airing programme is selected) /
dryness level (only if selectable/adjustable) / options. As soon as you
confirm a selection by pressing the knob, the button light will jump
to the next step.
• Select programme:
After you have switched on the dryer, you are not forced to follow
the GUIDED MODE.
It is up to you which order you choose to set your programme. To do
a setting, first press the relevant button, then turn the knob to
select, and finally press the knob to confirm.
The variety of options and dryness levels depends on the
programme selected. Therefore it is recommended to start your
setting with selecting the programme.
Make sure that the programme button lights up.
5. START PROGRAMME
Turn the knob to select the desired programme. The indic ...
HINTS AND TIPS
Respect the care labels of your laundry; make sure that it is
appropriate for being treated in a dryer.
DRYING CARE LABELS
The dots indicate the temperature degree for drying the laundry
Do not tumble dry
• To reduce the drying time, make sure that the laundry is spun with
the maximum possible spin speed of the wash programme. This
reduces the moisture content in the laundry.
• Always dry a full load; this optimizes the relative energy
ADAPTING THE DRYER TO WATER CONDUCTIVITY
The drying results are affected by the conductivity of the water
used during washing. If, by modifying the available dryness levels
(iron dry; cupboard dry; extra dry), you are not satisfied with the
final drying results, you can adapt the water conductivity level. The
dryer comes with preset level 2. Choose between level 1 (most damp
results) and 5 (most dry results).
Refer to section OPTIONS, FUNCTIONS A ...
For drying sports garments made of synthetics or cotton.
For drying big single items such as down jackets.
For drying outdoor clothes which are appropriate for being treated
in a dryer.
Economic drying of small laundry loads.
OPTIONS, FUNCTIONS AND INDICATORS
Not all options are combinable; the non-combinable option
switches off automatically.
OPTIONS which are directly selectable by pressing the
Minimizes creasing of garments made of cotton, synthetics
and their blends by adding a humidifying phase at the end of the
Use the option with small loads only, unload the garments from the
dryer immediately after programme end and put them on clothes
The humidity level automatically adjusts to “cupboard dry” and
cannot be changed with this option.
To adjust the desired Drying time if drying time or Airing
programme has been selected.
Press the button; the l ...
Enables to have the laundry ready at a particular time by
setting a delay until end of the programme.
Choose a delay up to 23 hours.
• Select programme and options.
• Press the “Finish in” button – the symbol over the button lights up.
• Turn the knob to select a delay up to 23 hours. Confirm the desired
delay by pressing the knob.
• Press “Start / Pause” - the countdown of the delay starts. The
display indicates that Finish in is active.
• The programme starts automatically, in time to be finished at the
end of the delay period. On programme start, the delay on the
display is replaced by the remaining programme duration.
To cancel the delay
• either press “Start/Pause” to cancel the delay. To start the selected
programme immediately, press “Start/Pause” again .
• or press and hold “On/Off” to cancel the complete programme
For any failures, refer to section TROUBLESHOOTING in the USE AND
Energy monito ...
COTTON IRON DRY
SPIN SPEED (rpm)
DRYING TIME (min)
*Reference programmes for Energy Label / Regulation 392/2012 /EU
Values are based on the default programme setting, with clean
air and bottom filter. For consumer tests, the door filter and
bottom filter need to be cleaned after each cycle.
For tests according EN 61121, the appliance shall be installed
using direct drain (see INSTALLATION GUIDE). The water shall be
collected in an external container for proper measurement.
The energy consumption and drying time may differ from the values