Zoom out
Zoom in
Previous page
1/44
Next page
Health & Safety, Use & Care and Installation guide
www.whirlpool.eu/register
1


Need help? Post your question in this forum.

Forumrules


Content of pages


  • Page 1

    Health & Safety, Use & Care and Installation guide www.whirlpool.eu/register ...
  • Page 2

    ENGLISH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 ...
  • Page 3

    EN ENGLISH HEALTH & SAFETY, USE & CARE and INSTALLATION GUIDES THANK YOU FOR BUYING A WHIRLPOOL PRODUCT. In order to receive a more complete assistance, please register your appliance on www.whirlpool.eu/register Index Health and Safety guide SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SAFEGUARDING THE ENVIRONMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 DECLARATION OF CONFORMITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Use and Care guide PRODU ...
  • Page 4

    EMPTYING THE WATER TANK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 CLEANING THE DOOR FILTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 CLEANING THE BOTTOM FILTER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 CLEANING THE OUTSIDE OF THE DRYER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 REVERSING THE DOOR STOP. . . . . . . ...
  • Page 5

    EN Health and Safety guide SAFETY INSTRUCTIONS IMPORTANT TO BE READ AND OBSERVED Before using the dryer carefully read, Health and Safety and Use and Care guides. Keep these instructions close at hand for future reference. YOUR SAFETY AND SAFETY OF OTHERS IS VERY IMPORTANT. This manual and the dryer itself provide important safety warnings, to be read and observed at all times. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol or the word DANGER or WARNING. These words mean: DANGER Indicates a hazardous situation which, if not avoided, will cause serious injury. WARNING Indicates a hazardous situation which, if not avoided, could cause serious injury. All safety warnings give specific details of the potential risk presented and indicate how to reduce risk of injury, damage and electric shock resulting from improper us ...
  • Page 6

    leading to a damaging of the laundry. If you want to stack the dryer on a washing machine, first contact our After-Sales Service to verify if this is possible. Stacking of a dryer is only admitted if the dryer is safely fixed on the washing machine by using an appropriate stacking kit. INTENDED USE OF THE PRODUCT This dryer is designed solely for domestic usage. To aim the dryer as professional use is forbidden. The manufacturer declines all responsibility for inappropriate use or incorrect setting of the controls. CAUTION: The dryer is not intended to be operated by means of an external timer or separate remote control system. Do not use the dryer outdoors. Do not store explosive or flammable substances such as aerosol cans and do not place or use gasoline or other flammable materials in or near the dryer: a fire may break out if the dryer is inadvertently switched on. INSTALLATION Children should not perform installation operations. Keep childre ...
  • Page 7

    EN The dryer is not designed for built-in installation. The dryer can be installed under a worktop, provided that adequate ventilation of the dryer is assured. Install a ventilation grid (minimum 45 cm x 8 cm), in the rear part of the worktop under which the dryer is installed. ELECTRICAL WARNINGS Make sure the voltage specified on the rating plate corresponds to that of your home. For installation to comply with current safety regulations, an omnipolar switch with minimum contact gap of 3 mm is required. Regulation require that the dryer is earthed. For dryers with fitted plug, if the plug is not suitable for you socket outlet, contact a qualified technician. Do not use extension leads, multiple sockets or adapters. Do not connect the dryer to a socket which can be operated by remote control. The power cable must be long enough for connecting the dryer, once fitted in its housing, to the main power supply. Do not pull the power supply cable. If th ...
  • Page 8

    CLEANING AND MAINTENANCE The dryer must be disconnected from the power supply before carrying out any cleaning or maintenance operation. Never use steam cleaning equipment. SAFEGUARDING THE ENVIRONMENT For dryer models with heatpump technology: This dryer contains fluorinated greenhouse gas (R134a). The circuit containing this gas is hermetically sealed. The electrical switchgear has a tested leakage rate of less than 0,1% per year. DISPOSAL OF PACKAGING MATERIALS The packaging material is 100% recyclable and is marked with the recycle symbol: The various parts of the packaging must therefore be disposed of responsibly and in full compliance with local authority regulations governing waste disposal. 8 SCRAPPING OF HOUSEHOLD APPLIANCES When scrapping the dryer, make it unusable by cutting off the power cable and removing the doors and shelves (if present) so that children cannot easily climb inside and become trapped. This dryer is manufac ...
  • Page 9

    EN ENERGY SAVING TIPS Always dry a full load, depending on the type of laundry and the programme/ drying time. For more detailed information, see the programme chart. By preference use the maximum spin speed allowed by your washing machine, since draining the water mechanically requires less energy. You will save time and energy when running your drying cycle. Always select the correct programme/drying time for the load in order to obtain the desired drying results. Start with the Iron Dry programme/drying time setting, remove the laundry to be ironed at the end of that cycle and dry the remainder of the load on the Cupboard Dry setting. Select the ‘Gentle’ option only in case of drying small loads. When drying cotton, for example, dry Iron Dry and Cupboard Dry loads together. DECLARATION OF CONFORMITY This appliance has been designed, constructed and distributed in compliance with the requirements of European Directives: LVD 2014/35/EU, E ...
  • Page 10

    Use and Care guide PRODUCT DESCRIPTION APPLIANCE 1. 1. Worktop 2. Control panel 3. Water tank 4. Door 5. Door handle 6. Door filter (behind door) 7. Plinth 8. Adjustable feet (4) 2. 3. 5. 4. 6. 7. 8. CONTROL PANEL 14. 1. 10 13. 2. 3. 12. 4. 5. 6. 7. 8. 9. 10. 11. 1. On/Off button (Reset if long pressed) 2. Programme button 3. Settings button 4. Key lock button 5. Steam refresh button 6. Knob (Turn to select / Press to confirm) 7. Finish in button 8. Drying / Airing time button 9. Drying level button 10. Options button 11. Start/Pause button 12. Eco monitor 13. Display 14. Programmes area ...
  • Page 11

    EN DOOR To open the door, pull the handle. To close the door, hold the handle and push so that you can hear it click shut. If you interrupt a running programme by opening the door, the programme will be reset if the dryer door is not closed again within one minute. DRUM LIGHT (if available) • During programme selection: the light goes on for laundry loading • After programme start: the light fades on and off while the laundry load is detected. • After programme end, when you open the door, the light goes on for a while for unloading the laundry. Then it goes off to save energy; touch any button to switch it on again. AVAILABLE ACCESSORIES Contact our After-Sales Service to check if the following accessory is available for your dryer model. STACKING KIT SHELF by which your dryer can be fixed on top of your washing machine to save space and to facilitate loading and unloading your dryer in the higher position. 11 ...
  • Page 12

    HOW TO USE THE APPLIANCE FIRST TIME USE 1. WHEN SWITCHING ON THE DRYER FOR THE FIRST TIME, YOU WILL BE ASKED TO Set the desired language Turn the knob until the desired language appears on the display Set the dryer to recall the last used programme setting or not Turn the knob to select one of the following settings On: the dryer recalls the programme which you used last when switching on the appliance. Off: Eco Cotton is selected by default when switching on the appliance. Confirm by pressing the knob. Confirm the indicated language by pressing the knob. Adapt the value for your local water conductivity The drying results are affected by the conductivity of the water used during washing. If, by modifying the available dryness levels (iron dry; cupboard dry; extra dry), you are not satisfied with the final drying results, you can adapt the water conductivity level. The dryer comes with preset level 2. Choose between level 1 (most damp results) and 5 ( ...
  • Page 13

    EN DAILY USE WARNING Make sure that no lighters or matches remain in the laundry. 1. LOAD THE LAUNDRY Respect the care labels of your laundry; make sure that it is appropriate for being treated in a dryer. Drying Care Labels The dots indicate the temperature degree for drying the laundry. Normal temperature Reduced temperature Do not tumble dry Make sure that the laundry is not soaked with flammable liquids. you through setting your programme in the following order: selection of programme / drying time (ONLY if Drying time or Airing programme is selected) / dryness level (only if selectable / adjustable) / options. As soon as you confirm a selection by pressing the knob, the button light will jump to the next step. Select programme: Make sure that the Programme button « lights up. Turn the knob to select the desired programme. The indicator next to the selected programme lights up. Open the door and load the laundry. Observe the maximum load ...
  • Page 14

    mum 180 minutes (three hours). Make sure that the Drying time button lights up. Turn the knob to select the desired drying / airing time. Confirm it by pressing the knob. Set dryness level, if needed If you want to change the dryness level, make sure that the Dryness level button « lights up. Turn the knob to select the desired dryness level, afterwards press the knob to confirm. Select options, if needed If you want to select additional options, make sure that the Options button « lights up. The options which are selectable for your programme are indicated by a lighting arrow. Turn the knob to select the desired options. The symbol of the selected option blinks. To confirm it, press the knob. Some options / functions can be selected by directly pressing the button. Refer to section OPTIONS, FUNCTIONS AND INDICATORS for more information. INDIVIDUAL MODE After you have switched on the dryer, you are not forced to follow the GUIDED MODE. It is up to you which ...
  • Page 15

    EN The dryer switches off automatically in about a quarter of an hour after programme end, to save energy. If not switched off right after programme end, the dryer will tumble the laundry for about 10 minutes, to prevent creasing. The display shows an animation. 9. EMPTY WATER TANK / CLEAN DOOR FILTER / CLEAN BOTTOM FILTER Empty • the water tank after each programme • the door filter after each programme • the bottom filter after every fifth programme. Refer to section CARE AND MAINTENANCE PROGRAMMES The dots indicate the temperature degree for drying the laundry. Normal temperature Reduced temperature Do not tumble dry PROGRAMME Type of Wash and Recommendations ECO COTTON Standard cotton programme, suitable to dry normal wet cotton laundry. Most efficient programme in terms of energy consumption for drying cotton laundry. The values on the Energy Label are based on this programme. COTTON For drying cotton laundry. Care Labels Regu ...
  • Page 16

    PROGRAMME Type of Wash and Recommendations SYNTHETICS For drying laundry made of synthetic fibres. Care Labels Regulations max. load (kg): 3.5 default programme duration (h): 1:20 selectable options: Steam option, Dryness level, Fresh care, Gentle DELICATES For drying delicate laundry which needs gentle treatment. max. load (kg): 2.5 default programme duration (h): 1:15 selectable options: Fresh care WOOL EXCELLENCE For drying woollens labelled with the Woolmark TOTAL EASY CARE WOOL. max. load (kg): 1.0 default programme duration (h): 1:20 selectable options: JEANS BIG ITEMS For drying cotton jeans-wear and garments made of robust jeans like material, such as trousers and jackets. For drying big laundry items, such as bathmats, blankets etc. max. load (kg): --- 3.0 default programme 1:50 selectable options: Fresh care, Gentle duration (h): max. load (kg): 3.0 defa ...
  • Page 17

    EN PROGRAMME Type of Wash and Recommendations STEAM REFRESH For refreshing laundry with steam. Specifically designed to refresh and remove odours from dry and clean casual garments like shirts, blouses, trousers made out of cotton, synthetics and their blends. Before loading the laundry into the drum, slightly humidify it by spraying it with water (maximum 200 ml; use a water spray bottle). Load the slightly humidified laundry into the drum and start the programme. After programme end, the garments shall be removed immediately and put on clothes hangers to minimize wrinkling. DRYING TIME SHIRTS Time-restricted drying programme. Select programme duration by option Drying time. For all fabrics appropriate for tumble drying. Suitable to add an additional short drying phase after programme end. Refer to OPTIONS, FUNCTIONS AND INDICATORS / option Drying time for more information. Gentle drying of shirts and blouses made of cotton, synthetic fibr ...
  • Page 18

    PROGRAMME Type of Wash and Recommendations TOWELS For drying robust laundry made of cotton, such as terry towels. Care Labels Regulations max. load (kg): 5.0 default programme duration (h): 2:00 selectable options: Fresh care, Gentle, Rapid OUTDOOR For drying outdoor clothes which are appropriate for being treated in a dryer. max. load (kg): 2.0 default programme duration (h): 1:15 selectable options: Fresh care DOWN JACKETS MINI LOAD For drying big single items such as down jackets. Economic drying of small laundry loads. max = maximum capacity of the dryer Programme durations indicated in the table are default values. The programme duration mainly depends on the humidity level of the laundry and the volume of the laundry load. For that reason, the real programme duration can deviate from the indicated values. 18 max. load (kg): 1.5 default programme 1:45 selectable options: Fresh care ...
  • Page 19

    EN OPTIONS OPTIONS WHICH ARE DIRECTLY SELECTABLE BY PRESSING THE RESPECTIVE BUTTON STEAM OPTION Minimizes creasing of garments made of cotton, synthetics and their blends by adding a humidifying phase at the end of the drying cycle. Use the option with small loads only, unload the garments from the dryer DRYING TIME OPTION To adjust the desired drying time if Drying time or Airing programme has been selected. Press the button; the light goes on, and the drying time which was used DRYNESS LEVEL To select the desired dryness level for the laundry load. Press the button; the light goes on. Turn the knob to select the desired dryness level. Choose between: Iron Dry (suitable to be ironed after the drying cycle, therefore still slightly humid) immediately after programme end and put them on clothes hangers. The humidity level automatically adjusts to “cupboard dry” and cannot be changed with this option. last appears on the display. Turn the kn ...
  • Page 20

    FUNCTIONS ON/OFF To switch the dryer on: press the button until the Start/Pause button lights up. To switch the dryer off after programme end: press the button until the lights go off. WARNING KNOB To cancel a running programme: press and hold the button until the display indicates that the programme is cancelled. After cancelling a running out so that the heat is programme, quickly remove dissipated. all items and spread them To select and confirm programmes, options and settings. Push to confirm Turn to select START/PAUSE KEY LOCK FINISH IN 20 To start the programme, after you have finished your settings To pause a running programme This function allows you to lock the buttons and the knob of the control panel against unwanted operation, for example by small children. Knob and buttons are locked now. The only working function is On/Off to switch the dryer off. To continue a paused programme The dryer must be switc ...
  • Page 21

    EN The colon on the display between hours and minutes blinks. end, that the programme has finished earlier or later. The programme starts automatically, in time to be finished at the end of the delay period. On programme start, the delay on the display is replaced by the remaining programme duration. When selecting a delay, the original programme duration appears again after the maximum possible delay of 23:30 hours. To exit the settings mode again without setting a delay, select and confirm the default programme duration. The programme duration can be influenced by certain factors, mainly by the humidity level of the laundry. For that reason, the programme duration is recalculated and adapted in certain programme phases. During these phases, the display shows an animation. SETTINGS To cancel the delay: Either press Start/Pause to cancel the delay. To start the selected programme immediately, press Start/ Pause again. This can lead to an ear ...
  • Page 22

    INDICATORS ENERGY MONITOR The less levels of the energy monitor are lit, the more economic is your programme setting. FAILURE For any failure indication on the display, refer to section TROUBLESHOOTING for more information. 22 ...
  • Page 23

    EN ENERGY SAVING AUTOMATIC SWITCH-OFF FUNCTION The dryer is designed to save energy. After the programme has finished, it therefore switches off automatically after about a quarter of an hour. ENERGY SAVING TIPS • The optimum ambience temperature for the dryer is between 15 and 20 °C. In case of a higher temperature, air the room. • To reduce the drying time, make sure that the laundry is spun with the maximum possible spin speed of the wash programme. This reduces the moisture content in the laundry. • Preferably dry a full load, as indicated in the Programmes table. This optimizes the relative energy consumption. • Do not over dry the laundry. • Use Gentle option only with small loads. • When drying cotton or synthetics laundry, run Iron dry and Cupboard dry loads together. Start the programme with dryness level Iron dry. At the end of the programme, remove the laundry to be ironed. Finish the drying process for the remaining load with dryness leve ...
  • Page 24

    CLEANING & MAINTENANCE WARNING Do not use flammable fluids to clean the dryer. For any cleaning and maintenance, switch off the dryer. EMPTYING THE WATER TANK Empty the water tank after each programme, provided the drain hose is not connected to your sewage system (refer to INSTALLATION GUIDE). 1. Hold the handle and carefully pull out the water tank. Hold the full water tank with both hands. 2. Empty the water. 24 3. Insert the water tank by pushing it back into place. Make sure that it is completely inserted in the compartment. ...
  • Page 25

    CLEANING THE DOOR FILTER EN 3. Clean the door filter after each programme. Make sure that the laundry is unloaded. Open the door. Carefully remove the complete lint from the screen by hand. If needed, the screen can be cleaned also under running water, using a soft brush. 2. Press the button to open the door filter. Clean the filter compartment with a soft cloth, or carefully with a vacuum cleaner. 1. Remove the door filter by pulling it upwards. 4. 5. Close the filter and reinsert it in the right direction, so that it completely integrates in the filter compartment. 25 ...
  • Page 26

    CLEANING THE BOTTOM FILTER Clean the bottom filter after every fifth programme. 1. Open the bottom flap. 4. Clean the filter foam and the filter by hand or under running water. Do not wash the filter foam in the washing machine. 2. Hold the handle and pull out the bottom filter. 5. Carefully wring out the filter foam. Do not insert it in the bottom filter dripping wet. 3. Remove the foam from the bottom filter, to clean it. 6. Fix the filter foam on the bottom filter. 7. Clean the filter chamber of the dryer with a damp cloth or carefully with a vacuum cleaner. 26 ...
  • Page 27

    EN 8. Insert the bottom filter again. Make sure that it 10. Close the bottom flap. is completely integrated in the filter compartment. 9. Clap the filter handle downwards. 27 ...
  • Page 28

    CLEANING THE OUTSIDE OF THE DRYER Use a soft damp cloth to clean the outer parts of the dryer. Do not use glass or general purpose cleaners, scouring powder or similar to clean the control panel – these substances might damage the surfaces. 28 ...
  • Page 29

    REVERSING THE DOOR STOP EN If needed, the door stop of the dryer door can be reversed. Use pliers and a cross-head screwdriver for the procedure. For removing and fixing the door, the help of a second person is recommended. Make sure that the dryer is unplugged. Open the dryer door. 1. 3. Remove the two screws on the door hinge. Remove the two screws which are situated over and under the door lock, left from the door opening. 4. Remove the door and carefully lay it upside 2. Press the small knob above the door lock down on a blanket or similar. with a small screwdriver. At the same time move upwards the door lock and pull it towards you with your finger. 29 ...
  • Page 30

    5. Unscrew the bottom screw, to release the cover frame on the front of the door. 7. Carefully turn the door frame in clockwise direction, and remove it. 2 1 8. Turn the door again and lay it upside down. 6. Turn the door and lay it down on the door glass. 1 1 2 2 30 ...
  • Page 31

    EN 9. Remove the two side screws. Do this on both 11. Remove the side parts on each side of the sides of the door. door. 1 2 12. Reverse the side parts and insert them again. 10. Remove the 4 inner screws on each side of the door. 31 ...
  • Page 32

    13. Fix the 2 side screws on both sides of the door again. 15. Turn the door and lay it down on the door glass. 1 2 14. Fix the 4 inner screws on each side again. 16. Refit the door frame. 1 2 32 ...
  • Page 33

    EN 17. Turn the door again and lay it upside down. 19. Fix the two screws over and under the door Fix the bottom screw again. 18. Insert the door lock on the right side of the lock, on the right side of the door opening. 20. Fix the door on the left side of the door opening by turning in the two screws. door opening. Press it completely inside the hole and move it a bit downwards, until the small knob of the door lock latches. 33 ...
  • Page 34

    TROUBLESHOOTING GUIDE & AFTER-SALES SERVICE Your dryer is equipped with various automatic safety functions. These enable failures to be detected in good time and the safety system can react appropriately. These failures are frequently so minor that they can be removed within a few minutes. Problem Possible Cause Solution DRYING TAKES TOO LONG LAUNDRY IS NOT DRY ENOUGH Selected programme not optimum for type of laundry • Select the programme matching best the type of laundry; refer to section PROGRAMMES Door filter or bottom filter clogged • Clean the filters according to the instructions in section CARE AND MAINTENANCE Laundry too wet • Make sure that laundry is spun with the maximum spin speed before drying. If laundry was spun with spin speed below 800 rpm, the water tank may get full during the drying programme. The ambient temperature is too high • The ambient temperature is ideal between 15 and 20°C. If the ambient temper ...
  • Page 35

    EN WATER DROPLETS ARE BENEATH THE DRYER Bottom filter not inserted correctly • Check position of the bottom filter and make sure it is completely integrated in the filter compartment. Lint remaining on bottom filter or door seal • Remove lint residues on the rubber seals of bottom filter and door seal. Water tank not inserted correctly • Push in the water tank and make sure that it is completely integrated in the tank compartment. Direct drain connection not working properly • Check drain connection and make sure that the water can drain. Dryer not standing level • Check level position of dryer on the tabletop with a water level; if needed adjust the dryer feet. (refer to INSTALLATION GUIDE). 35 ...
  • Page 36

    FAILURE INDICATOR AND MESSAGES Make sure to • Empty the water tank after each programme • Clean the door filter after each programme • Clean the bottom filter after every fifth programme Failure Indicator Display message WATER TANK FULL CLEAN BOTTOM FILTER Possible Cause Water tank may be • filled with water • Empty water tank; make sure to insert it properly afterwards. • not correctly positioned • Push in the water tank to make sure that it is correctly inserted in the tank compartment. Bottom filter may be • blocked by lint • not correctly positioned CLEAN DOOR FILTER • Clean the bottom filter; make sure to insert it properly afterwards • Push in the bottom filter and move the release levers into vertical position, to make sure that the filter is correctly inserted in the filter compartment. Close the flap. Door filter may be • blocked by lint • not correctly positioned Refer to section CARE AND MAINTENANCE for em ...
  • Page 37

    EN Below is a summary of possible failure causes and solutions. If the problem persists after having followed the instructions as indicated below, press and hold On/ Off for at least three seconds. If afterwards the failure indication still appears, switch off and unplug the dryer and contact our After-Sales Service. Failure Indicator Display message Possible Cause Solution F01 to F04 Failure of a component Press and hold On/Off for at least 3 seconds. F05 to F09 Failure of a component Switch off and unplug the dryer. Immediately open the door and take out the laundry, so that the heat can dissipate. Make sure that the ambient temperature ranges between 5°C and 35°C. Wait for about an hour. Plug in the dryer, load the laundry and start the programme again. If the failure persists, call the After-Sales Service. F10 to F24 Failure of a component Switch off and unplug the dryer. Wait for about half an hour. Plug in the dryer and st ...
  • Page 38

    TRANSPORT AND HANDLING WARNING Never lift the dryer by holding it at the worktop. 1. Unplug the dryer. 2. Make sure that door and water tank are properly closed. 38 3. If the drain hose is connected to your sewage system, fix the drain hose on the rear of the dryer again (see Installation Guide). ...
  • Page 39

    EN AFTER-SALES SERVICE BEFORE CALLING THE AFTER-SALES SERVICE 1. See if you can solve the problem by yourself with the help of the suggestions given in the TROUBLESHOOTING GUIDE. 2. Switch the appliance off and on again to see if the failure persists. IF AFTER THE ABOVE CHECKS THE FAILURE STILL OCCURS, GET IN TOUCH WITH THE NEAREST AFTER-SALES SERVICE To receive assistance, call the number shown on the warranty booklet or follow the instructions on the website www‌.w ‌ hirlpool‌.e ‌u Always specify: • a brief description of the failure; • the type and exact model of the appliance; • the service number (number after the word Service on the rating plate on the back of the dryer). The service number is also indicated on the guarantee booklet; • your full address; • your telephone number. For any repairs, use our authorized After-Sales Service, to ensure proper repairing and use of original spare parts. Manufacturer: Whirlpool Europe s.r.l ...
  • Page 40

    1. 2a. 40 2b. ...
  • Page 41

    EN 3a. max 2 cm max 0.79 inch 3b. 41 ...
  • Page 42

    4. 1 2 max 100 cm 39 inch 42 ...
  • Page 43

    EN 5. 6a. 6b. .............. xxxx xxxx xxxx xxx V ~ xx Hz xx A IPX4 D V E 43 ...
  • Page 44

    001 4 0 0 0 1 0 898934 ...



Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool HSCX 10432 - 6TH SENSE Supreme Care at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool HSCX 10432 - 6TH SENSE Supreme Care in the language / languages: English as an attachment in your email.

The manual is 6,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool HSCX 10432 - 6TH SENSE Supreme Care

Whirlpool HSCX 10432 - 6TH SENSE Supreme Care Quick start guide - English - 8 pages

Whirlpool HSCX 10432 - 6TH SENSE Supreme Care User Manual - German - 45 pages

Whirlpool HSCX 10432 - 6TH SENSE Supreme Care Quick start guide - German - 8 pages

Whirlpool HSCX 10432 - 6TH SENSE Supreme Care User Manual - Dutch - 45 pages

Whirlpool HSCX 10432 - 6TH SENSE Supreme Care Quick start guide - Dutch - 8 pages

Whirlpool HSCX 10432 - 6TH SENSE Supreme Care User Manual - French - 45 pages

Whirlpool HSCX 10432 - 6TH SENSE Supreme Care Quick start guide - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info