333542
8
Zoom out
Zoom in
Previous page
1/9
Next page
20
CARE AND MAINTENANCE
Clean the cooktop, when it is cool, after each use to prevent
the build-up of dirt.
Use a clean cloth, absorbent kitchen wipes and liquid detergent.
Do not use abrasive, corrosive or chlorine based products, or
pan scourers.
Do not leave acid or alkaline substances, such as vinegar, salt
or lemon juice on the surface.
Enamelled cooktop
Enamelled parts must be washed with a sponge and soapy
water or other non-abrasive products.
Dry with a soft cloth. If acid substances such as lemon juice,
tomato sauce, vinegar, etc. are left on the enamel for a long
time they will etch it, making it opaque.
Stainless steel cooktop
Stainless steel parts must be rinsed with water and dried with
a soft and clean cloth or with a chamois leather.
For difficult dirt, use a specific non-abrasive product or a
little hot vinegar.
N.B.: Regular use could cause discolouring around the
burners, because of the high temperature.
Cleaning the burners and the grids
Burners and grids can be removed and washed with suitable
products.
After cleaning, dry carefully and reposition into their seats.
In models with a safety valve, make sure that the sensor near
each burner remains clean.
In appliances with electric ignition, make sure that the
electrode remains clean so that the sparks can strike
properly. The spark plugs must be cleaned very carefully.
N.B.: To avoid damaging the electric ignition, do not use the
cooktop when the burners are not in place.
Gas taps
The gas taps should be cleaned regularly
by a qualified
technician only
.
If the gas taps are not working correctly, call After-Sales
Service.
Correct position of the burners
It is very important to check the perfect positioning of the
burner spreader
(F)
and burner cap
(C)
(see figure) because if
they are moved out of their seats, serious problems might
occur.
Make sure that the
(S)
electrode is always clean so that the
sparks can strike.
In models with a safety valve, make sure that the sensor
(T)
near each burner is always clean so that the safety valve can
be adjusted properly. Both the sensor and the spark plug
must be cleaned carefully.
Triple crown burner
This burner must be correctly positioned (see figure), making
sure that the ribs enter their housing as indicated by the arrow.
If the burner is correctly positioned it will not turn.
Correctly position cap
(A)
and ring
(B)
in their housing.
3gb66016.fm Page 20 Monday, August 19, 2002 11:59 AM
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool akr 021 ix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool akr 021 ix in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool akr 021 ix

Whirlpool akr 021 ix Quick start guide - English - 2 pages

Whirlpool akr 021 ix User Manual - German - 9 pages

Whirlpool akr 021 ix User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info