333542
4
Zoom out
Zoom in
Previous page
1/9
Next page
16
INSTALLATION - TECHNICAL INFORMATION FOR THE
INSTALLER
Before installing the cooktop, make sure that the local
distribution conditions (gas nature and pressure) and the
adjustment of this appliance are compatible. The appliance
adjustment values are indicated on the rating plate or label.
Gas supply
- The cooktop is set to work with the gas indicated on the rating
plate.
- The gas supply system must comply with local regulations.
- To connect the cooktop to the gas mains or cylinder, use a
fixed metal pipe or a flexible stainless steel hose in compliance
with local regulations.
The flexible metal tube must be no more than 2 m long.
Attention:
If a flexible stainless steel hose is used, it must be
installed in such a way that it cannot come into contact with a
mobile part of the unit, it is not obstructed and it can
be inspected along its whole length.
The cooktop connection is made using the following:
- 1 nut
(A)
- 1 gasket
(F)
- 1 conical union elbow
(C)
.
Important:
- Never force the turning of union (C) without first
slackening nut (A).
- The gasket (F) guarantees the seal of the gas connection.
Replace it when worn or damaged. The gasket must comply
with local standards.
- After the connection, check for leaks with a soapy
solution. Never use flames.
Replacing the gas burner injectors
To replace the injectors, please refer to the Injector Table, in
the separate Product Description Sheet.
Remove the grids and extract the burner bodies.
With a spanner, replace nozzles
(J)
with the nozzle suitable
to the gas to be used.
Adjusting the gas burner minimum
For taps with adjusting screw inside the shaft:
- with a screwdriver, max. diameter 3 mm, turn the screw inside
the tap shaft until adjustment is correct.
- perform the adjustment with the tap in the minimum position
(small flame ).
- For taps with adjusting screw on the body:
- with a screwdriver turn screw
(A)
until adjustment is correct.
- In models with ignition incorporated in the knob, access
screw
(A)
through a hole in the microswitch.
- Perform the adjustment with the tap in the minimum position
(small flame ).
For Gas G30/G31 tighten the adjusting screw completely.
Correct flame adjustment
Make sure that the appearance of the flame is stable and even. Also
make sure that when turning from the max opening position to the
min opening position, the flame does not go out.
Gas tap lubrication
If a gas tap is difficult to turn, disassemble and clean it
carefully with petrol and spread special high-temperature
resistant grease on it.
These operations must be performed by a qualified technician.
conical
3gb66016.fm Page 16 Monday, August 19, 2002 11:59 AM
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool akr 021 ix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool akr 021 ix in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool akr 021 ix

Whirlpool akr 021 ix Quick start guide - English - 2 pages

Whirlpool akr 021 ix User Manual - German - 9 pages

Whirlpool akr 021 ix User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info