Manual Waeco PerfectView CAM60ADR (page 30 of 224) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

614283

Zoom out

Zoom in

1/224

Mounting the camera PerfectView CAM60ADR

To make and test the electrical connection, the following tools are required:

 Diode test lamp (fig. 1 8, page 3) or voltmeter (fig. 1 9, page 3)

 Insulating tape (fig. 1 11, page 3)

 Cable bushing sleeves, if necessary

To fasten the cables you may require additional cable binders.

8.2 Mounting the camera

Observe the following installation instructions:

 To provide a suitable viewing angle, the camera must be attached at

a height of at least 2 m.

Ensure that you have a firm place from which to work when mounting

the camera.

 Ensure that the installation location of the camera is sufficiently firm

(e.g. to prevent the camera from being knocked down by branches that

may brush over the roof of the vehicle).

 Mount the camera bracket horizontally and in the middle of the rear of the

vehicle (fig. 8, page 6).

CAUTION!

Select a location for the camera and attach it so securely that

it cannot under any circumstances fall off and injure bystanders

(e.g. by being knocked off by branches brushing over the roof of

the vehicle).

NOTE

If installing the camera alters the vehicle height or length specified

in the vehicle documents, your vehicle must be inspected by the

appropriate authorities.

Make sure that you are in possession of documents verifying that

your vehicle has passed this inspection.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Waeco PerfectView CAM60ADR in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Waeco PerfectView CAM60ADR Manual

Product: