629188
3
Zoom out
Zoom in
Previous page
1/21
Next page
Note:
VIZIO is not responsible for damages incurred by insecure wall-mounting hardware.
1. Choose a wall that is within reach of an electrical outlet and is smooth and sturdy.
2. Drill two holes 6 inches (152 mm) apart into the wall.
3. Insert a screw into each hole leaving 0.12 inches (3 mm) of the screw head exposed.
4. Line up the wall-mount slots on the bottom of your router with the screws and slide the router down until the screws fit snugly into the
wall-mount slots.
Chapter 2 Basic Controls and Connections
Front LEDs
Wireless
Lights when wireless is enabled.
Flashes when your router is sending or receiving data over the network.
WPS (Wi-Fi Protected Setup)
Lights when your router is setting up using WPS. Your router supports one WPS
session at a time so wait until the LED stops flashing before setting up another WPS
device.
Turns off if there is an error during the WPS setup process. Make sure your device(s) support WPS, and then try again.
See WPS (Wi-Fi Protected Setup) for information on connecting via WPS.
Internet
Lights when there is a working Internet connection.
Flashes to indicate network activity over the Internet port.
Rear Panel Connections
1. WPS (Wi-Fi Protected Setup) Button—Use to automatically configure wireless security for your wireless network if you have devices
that support WI-FI Protected Setup. See
WPS (Wi-Fi Protected Setup) for information on connecting via WPS.
2. USB—Connect a USB storage device to this port.
3. Internet—Connect your high-speed cable or DSL Internet service to this port.
4. Ethernet 1, 2, 3, 4—Connect your router to computers on your wired network and other Ethernet devices to these ports. The LED under
the port lights when, your router is connected to the device. The LED flashes when there is network activity over that port. .
5. Reset—Press and hold for approximately ten seconds to reset your router to factory default settings. If you created any custom settings,
including a login name and password, they will be erased and replaced
with the factory default settings.
6. Power—Connect the power adapter to this port. The LED under the port
lights when your router is on. The LED flashes when your router goes
through a self-diagnostic mode during boot-up.
Chapter 3 Setting Up Your Router
What You Need
Your VIZIO Router, Power Adapter, and Ethernet cable (included)
High-speed Internet connection and access to your Internet modem
(contact your local provider if you need help with this)
Additional Ethernet cable (usually provided with your Internet modem)
A computer to run the Quick Setup App
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vizio XWR100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vizio XWR100 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info