652070
2
Zoom out
Zoom in
Previous page
1/8
Next page
2
DE
EN
1. Wichtige Hinweise
Lesen Sie vor der ersten Benutzung des
Produktes bzw. dessen Einbau diese Anlei-
tung komplett und aufmerksam durch. Be-
wahren Sie diese Anleitung auf. Sie ist Teil
des Produktes.
Das Produkt richtig verwenden
Das Produkt darf ausschließlich dieser
Anleitung gemäß verwendet werden.
Dieses Funktionsmodell ist bestimmt
zum Einbau in Modelleisenbahnanlagen •
und Dioramen
zum Anschluss an einen zugelassenen •
Modellbahntransformator bzw. an einer
damit versorgten elektrischen Steuerung
zum Betrieb in trockenen Räumen. •
Jeder darüber hinausgehende Gebrauch gilt
als nicht bestimmungsgemäß. Für daraus
resultierende Schäden haftet der Hersteller
nicht.
Achtung:
Die Antriebseinheit im Zylinder sowie
dieinderZuleitungbendlicheelektro-
nische Baugruppe dürfen nicht geöff-
net, beschädigt, oder mit Feuchtigkeit
im Verbindung gebracht werden. Diese
sind für den einwandfreien Betrieb er-
forderlich.
2. Einführung / Eigenschaften
Die Funktionsmodelle der Serie eMotion
– Bewegte Welt sorgen für Leben auf der
Modelleisenbahn. Das speziell entwickelte
Funktionsmodul ist mit einer elektronischen
Steuerung ausgerüstet, die realistische
Licht- oder Bewegungseffekte erzeugt. An-
trieb und Steuerung sind fest mit dem Modell
verbunden.
Achtung: Fassen Sie das Modell stets vor-
sichtigamGehäusean,dadieligranen
Teile des Modells sonst abbrechen könnten.
1. Important information
Please read this manual prior to rst use of
the product resp. its installation! Keep this
manual. It is part of the product.
Using the product
for its correct purpose
This product must only be used as re-
quired in this manual.
This model is intended
for installation in model railroad layouts
and dioramas
for connection to an authorized model
railroad transformer or an electrical con-
trol system connected to one
for operation in a dry area.
Using the product for any other purpose is
not approved and is considered incorrect.
The manufacturer cannot be held respon-
sible for any damage resulting from the im-
proper use of this product.
Caution:
The drive unit in the grey cylinder and
the electronic control unit connected to
the model must not be opened, dam-
aged, or brought in contact with mois-
ture. Both components are essential
for safe operation of the model.
2. Introduction
The functional models of the eMotion series
bring life to your model train layout. The
drive unit contains a controller, which gener-
ates realistic lighting effects or movements.
Drive and control unit are xed to the model.
Attention: If you have to unmount the mod-
el, carefully take the body of the model and
push it up.
Märklin ist ein eingetragenes Warenzeichen der / is a registered
trademark of Gebr. Märklin & Cie GmbH, Göppingen.
TRIX ist ein eingetragenes Warenzeichen der / is a registered
trademark of Gebr. Märklin & Cie GmbH, Göppingen.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann 49817 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann 49817 in the language / languages: English, German as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info