Manual Viessmann 4516 (page 4 of 8) (English, German)

652065

Zoom out

Zoom in

1/8

Fig. 3Abb. 3 Fig. 4

90°

15 mm

Ø 6 mm

Abb. 4

Fig. 2

Abb. 2

Sh0 (Rangierverbot)

Sh0 (shunting prohibited)

Sh1 (Rangierverbot aufgehoben)

Sh1 (shunting allowed)

blaues Kabel mit roter Markierung

blue cable with red marking

blaues Kabel mit grüner Markierung

blue cable with green marking

5. Montage

1) Prüfen Sie vor dem Einbau des Signals, wie im

Punkt „Funktionskontrolle“ beschrieben, des-

sen einwandfreie Funktion.

2) Beschriften Sie das Signal gemäß den Hinwei-

sen auf Seite 3.

3) Sägen Sie an der Montagestelle ein Loch mit

den Maßen 15 mm x 15 mm. Bohren Sie dazu

zuerst 4 Löcher mit 6 mm Durchmesser. Ver-

wenden Sie die in der Abbildung 3 abgedruckte

Schablone.

4) Führen Sie die Anschlusskabel von oben durch

das Montageloch und stecken Sie dann das Si-

gnal mit dem Antrieb voran hinein.

5) Halten Sie die Bodenplatte des Signals jetzt

von oben fest. Schieben Sie den Befestigungs-

ring von unten so auf den Antrieb, dass die

Rastnasen um 90° zu der Riffelung am Gehäu-

se des Antriebes verdreht sind. Wenn nun die 4

Kunststofaschen des Befestigungsringes mit

der Anlagenplatte unter mechanischer Span-

nung stehen, drehen Sie den Ring so, dass die

Nasen in der Riffelung des Antriebsgehäuses

für einen festen Halt sorgen.

5. Mounting

1) Check that the signal works properly as per the

instructions above before you start installing it

on the layout.

2) Letter the signal in accordance with the instruc-

tions on page 3.

3) Saw a square hole of 15 mm x 15 mm at the

mounting place. But before 4 holes of 6 mm di-

ameter each should be drilled in the corners.

Please use the pattern which is shown in gure

4) The signal‘s connection wires have to be insert-

ed into the hole rst. After that put the signal

with the drive rst into that hole.

5) Now the base plate of the signal has to be held

in place (perhaps by a second person). Then

push the mounting ring from below onto the

drive in such a manner that the tabs are at a

right angle to the groves on the housing of the

drive. Once the 4 plastic tabs of the mounting

ring are under tension, you turn the ring until

the tabs lock against the groves on the hous-

ing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann 4516 in the language / languages: English, German as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Viessmann 4516 Manual

Product: