514914

Vermeiren Controleunit DX2 Basic Manual

5
Zoom out
Zoom in
Previous page
1/20
Next page
DX2 Operator control
vD - 2013-04
4
Using battery charge indicator
The battery charge indicator is used to indicate that your wheelchair power is on
and provides an estimate of the remaining battery capacity.
Any green LED's indicate that your batteries are well charged.
If only amber and red LED's are light, the batteries are moderately charged.
Recharge your batteries before you make a long trip.
If only red LED's are light, the batteries are running out of charge. Recharge as
soon as possible.
The following table indicates what the battery charge indicator will display.
Display Description Meaning Remarks
All LEDs dark. System off.
All LEDs are
flashing.
System on. Warning: battery too full.
Slow down if you are
driving down a slope.
All LEDs are lit. System on. LEDs show the charge
level.: Full battery
Only red and yellow
LEDs lit.
Low battery level. Battery half full. Start the
return journey.
Only red LEDs lit. Very low battery level. Battery low. Recharge
soon.
Red LEDs are
flashing.
Battery almost empty. Recharge now.
1 Red Led is
flashing.
Battery empty. Recharge immediately.
The LEDs turn on
one by one from left
to right.
Drive inhibit, the chair will
not drive.
The LEDs turn on
one by one from left
to right, followed by
one second where
the current battery
capacity is
displayed.
The charger is connected to
the operator control.
All leds turn on one
by one from left to
right. The Fault
indicator will show
corresponding flash
code.
Indicate that the chair will
not drive.
A fault has occurred.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermeiren Controleunit DX2 Basic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermeiren Controleunit DX2 Basic in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vermeiren Controleunit DX2 Basic

Vermeiren Controleunit DX2 Basic User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info