514914

Vermeiren Controleunit DX2 Basic Manual

4
Zoom out
Zoom in
Previous page
1/20
Next page
DX2 Operator control
vD - 2013-04
3
Locking your operator control
It is possible to lock your operator control so that unauthorized people cannot turn your electric
wheelchair on.
To lock your wheelchair:
While the power is ON, press and hold the ON/OFF button for 4 seconds.
The display will turn off immediately. After 4 seconds all LED's and the Lock LED
turn on for 1 second to indicate that the DX system is now locked.
To unlock your wheelchair:
While your wheelchair is locked, press the ON/OFF button to turn your
wheelchair on.
The Lock LED will flash for 10 seconds to indicate that the DX system is locked.
Press the Horn button twice before the countdown is completed (approximately
10 seconds).
The current state-of-charge will then be displayed and the operator control may
be operated normally.
If the user does not press the Horn button twice before the countdown is complete, the
Horn will sound a short beep and your operator control will turn itself off.
You must complete these procedure completely otherwise your wheelchair will not drive
again.
Sleep mode
The DX System will go to sleep after a period of inactivity of a quarter.
When the DX System sleeps, it is partially turned off to reduce energy consumption.
To reactivate the DX system:
Press any button on the DX system or move the joystick. The DX system turns
on.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermeiren Controleunit DX2 Basic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermeiren Controleunit DX2 Basic in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vermeiren Controleunit DX2 Basic

Vermeiren Controleunit DX2 Basic User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info