622286
5
Zoom out
Zoom in
Previous page
1/76
Next page
DVM1200 VELLEMAN
- 5 -
c. Keypad
Key
Symbol
Description
SELECT
A mA μA
Power-off
Switches between resistance measurement, diode test and continuity check.
Switches between DC and AC current.
Disables the auto power-off function.
HOLD/LIGHT
Press to enter and exit the data hold mode. Press and hold it for 2 seconds to
switch backlight on or off.
RANG
V~, V , Ω,
A, mA, μA
Press to enter the manual ranging mode.
Press to browse through the available ranges.
Press and hold for 2 seconds to return to autoranging mode.
REL
Press to enter and exit the relative measurement mode.
MAX/MIN
Maximum/minimum value measurement (except Hz/duty, capacitance)
Press to enter the max/min mode.
Press again to display the max value.
Press again to display the min value.
Hz/DUTY
V~, A, mA, μA
Press to start frequency counter. Press again to enter duty cycle mode and press
again to exit.
4. Operating Instructions
a. General Functions
Data Hold Mode
The data hold function makes the meter stop updating the display. The meter switches to the manual ranging
mode when enabling this function. This function can be cancelled by changing the measurement mode or by
pushing the RANG or HOLD/LIGHT key again.
To enter the mode:
1. Press the HOLD/LIGHT key. appears on the display.
2. A second short press returns the meter to the normal mode.
Manual Ranging and Autoranging Modes
* In autoranging mode, the meter selects the best range for the detected input. This allows you to switch test
points without having to reset the range.
* The manual ranging mode allows you to override the autoranging mode and to lock the meter in a specific
range.
* The meter defaults to the autoranging mode in measurement functions that have mode than one range. The
meter displays when in autoranging mode.
1. Press RANG to enter the manual ranging mode. Each press on the RANG key will increase the range.
NOTE: If you manually change the range after entering the data hold mode, the meter will exit this mode.
2. Hold the RANG key pressed to exit the manual ranging mode and to enter the autoranging mode.
Battery Saver
Turn on the meter. The meter turns off automatically after approximately 30 minutes. Press HOLD/LIGHT or
rotate the rotary switch to reactivate the meter. Hold SELECT pressed to disable the battery saver function.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velleman DVM1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velleman DVM1200 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info