622286

Velleman DVM1200 Manual

3
Zoom out
Zoom in
Previous page
1/76
Next page
DVM1200 VELLEMAN
- 3 -
DVM1200 – MULTIMETER WITH USB INTERFACE – 6 000 COUNTS
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
2. Safety Instructions
Measurement category III is for measurements performed in the building installation.
Measurement category II is for measurements performed on circuits directly connected to the low-voltage
installation.
Measurement category I is for measurements performed on circuits not directly connected to the mains.
When using this multimeter, the user must observe all normal safety rules concerning:
o protection against the dangers of electric current.
o protection of the multimeter against misuse.
For your own safety, only use the test probes supplied with the instrument. Before use, check that they are in
good condition.
If the meter is used near noise-generating equipment, be aware that the display may become unstable or may
indicate large errors.
Do not use the meter or test leads if they look damaged.
Use the meter only as specified in this manual; otherwise, the protection provided by the meter may be impaired.
Use extreme caution when working around bare conductors or bus bars.
Do not operate the meter around explosive gas, vapour or dust.
Verify the meter's operation by measuring a known voltage. Do not use the meter if it operates abnormally.
Protection may be impaired. When in doubt, have the meter serviced.
Use the proper terminals, function and range for your measurements.
When the range of the value to be measured is unknown, check that the range initially set on the multimeter is the
highest possible or, wherever possible, choose the auto-ranging mode.
To avoid damages to the instrument, do not exceed the maximum limits of the input values shown in the technical
specification tables.
When the multimeter is linked to measurement circuits, do not touch unused terminals.
Caution when working with voltages above 60VDC or 30VAC rms. Such voltages pose a shock hazard.
When using the probes, keep your fingers behind the finger guards.
When making connections, connect the common test lead before connecting the live test lead; when
disconnecting, disconnect the live test lead before disconnecting the common test lead.
Before changing functions, disconnect the test leads from the circuit under test.
For all DC functions, including manual or auto-ranging, to avoid the risk of shock due to possible improper
reading, verify the presence of any AC voltages by first using the AC function. Then select a DC voltage range
equal to or greater than the AC range.
Disconnect circuit power and discharge all high-voltage capacitors before testing resistance, continuity, diodes or
capacitance.
Never perform resistance or continuity measurements on live circuits.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velleman DVM1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velleman DVM1200 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info