Manual VAX V-081 (page 4 of 12) (English)

541456

Zoom out

Zoom in

1/12

vax.co.uk

assembly

3. Assembly

IMPORTANT: Never unscrew the tank cap during

use. The tank is under pressure.

IMPORTANT: Do not operate a damaged appliance

or damaged accessories.

IMPORTANT: This steam cleaner is not intended

for commercial use.

NOTE: Carpets should be dry vacuumed thoroughly

before using the steam cleaner.

NOTE: If the supply cord is damaged, it must be replaced

by the manufacturer, a Vax service agent or similarly

qualified persons in order to avoid hazard

The hose with steam gun must be connected to the

appliance and the desired accessory must be attached

before the steam cleaner can be used. The steam cleaner

has an accessories compartment that houses the detail

nozzle, both brush nozzles, the jet nozzle and the 2-in-1

nozzle. Open the accessories compartment by pulling the

locking handle upwards and lifting the transparent cover

of the accessories compartment off towards the front

(Figs.3/1 and 3/2).

the cover. Slide the nose of the cover into the recess

above the steam socket and press it down firmly at the

back until the cover clicks into place.

First of all connect the hose to the steam socket on the

front of the steam cleaner. To do this, flip the black cover

flap down and push the connector of the hose firmly into

the steam socket until it clicks into place (Fig.3/3).

To remove the hose, press in both release buttons on the

right-hand and left-hand sides of the steam connector

and pull it out of the steam socket (Fig.3/4).

Extension Tubes

Assemble the extension tubes if the steam cleaner is to

be used to clean floors or difficult to reach areas. To do

this, push the open end of a tube onto the steam gun.

Push it onto the steam gun until the release button of

the steam gun clicks into place (Fig.3/5). Add one, two or

all three extension tubes as required.

Fig.3/1

Fig.3/4

Fig.3/2

Fig.3/3

V-081 Series User Guide.qxd:User Guide 22/4/10 17:26 Page 4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of VAX V-081 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

VAX V-081 Manual

Product: