541456

VAX V-081 Manual

10
Zoom out
Zoom in
Previous page
1/12
Next page
vax.co.uk
10
storage/ troubleshooting
7. Storage
Switch the steam cleaner off. The green operating pilot
lamp goes off. Press the steam button on the steam gun
(Fig.7/1) to release the remaining pressure. Secure the
steam gun by pushing the locking pin on the left hand
side of the handle in to the right.
Remove the mains plug from the socket and allow the
appliance to cool down. Empty the water tank so that no
deposits can settle (Fig.7/2).
The steam cleaner must have cooled down completely
before being put away. Store the steam cleaner so that it
is out of the reach of children. The extension tube with
assembled floor nozzle may be inserted in the parking
holder on the back of the steam cleaner for storage
purposes or for short breaks while working.
8. Troubleshooting
WARNING: To reduce the risk of personal injury,
unplug the steam cleaner before performing
maintenance or troubleshooting checks.
PROBLEM: Operating pilot lamp fails to light.
Cause: The steam cleaner is not plugged into a
socket or is not switched on.
Solution: Insert the mains plug into a socket or switch
the steam cleaner on.
Cause: The socket is faulty.
Solution: Check the socket by unplugging the steam
cleaner and plugging in a different appliance.
Cause: The power cable is damaged.
Solution: Have the cable replaced by a Vax Service
Agent.
PROBLEM: No steam is emitted when the steam
button is pressed.
Cause: The child proof lock is preventing release of
the steam button.
Solution: Push the pin on the right-hand side of the
steam gun inwards and to the left.
Cause: The water tank is empty
Solution: Top up with water.
PROBLEM: Only a very small amount of steam flows
out.
Cause: The steam controller is set to minimum.
Solution: Turn the steam controller anticlockwise until
sufficient steam is emitted.
PROBLEM: The steam cleaner takes a very long time to
heat up.
Cause: The water tank is furred up.
Solution: De-scale the water tank.
Fig.7/1
Fig.7/2
!
V-081 Series User Guide.qxd:User Guide 22/4/10 17:26 Page 10
… 10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VAX V-081 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VAX V-081 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info