652324
5
Zoom out
Zoom in
Previous page
1/56
Next page
5
General Information
When the appliance is installed on existing systems, ensure
yourself that:
- Theueoutletpipeissuitableforcondensingboilers,for
the temperature of the products of combustion, calculated
and manufactured according to the regulations in force. It
must be installed as much as possible in a straight line,
tested for soundness, insulated and must not have any
occlusions or restrictions.
- Theueoutletpipehasaconnectionforthedischargeof
condensate.
- The boiler room has a suitable outlet for the discharge of
condensate produce by the boiler.
- Theelectricalsystemhasbeenttedincompliancetothe
specicnormsandtheworkhasbeencarriedoutbya
competent person.
- Thecirculationpump’soutput,theheadandowdirection
are suitable.
- The gas feeding supply pipe and the eventual tank are
constructed according to the regulations in force.
- The expansion vessels assure the total absorption of the
dilatationoftheuidcontainedinthesystem.
- The system has been cleaned of impurities and lime scale.
When a Modulex boiler is installed onto an existing
heating system:
In case the replacement of an existing boiler in an old system can
be programmed, it
is necessary to thoroughly
clean out the system with a basic solution.
The system must be cleaned 4 weeks before
the substitution, with the system ring at a
temperature of 35°C to 40°C.
WARNING!
If it is noticed that a new Modulex has replaced,
in an old system the existing boiler without having first perfor-
med what said in the previous paragraph, Do not wash now
the system, as residual products, present in the circuit, could
lead to system gathering in the boiler body, causing damage.
UNICAL recommends contacting a specialised company for
water treatment.
Instead, if installing a Modulex boiler in a new system, it is
still recommended to thoroughly clean out the system with an
adequate product and fit a Y filter with two isolating valves onthe
boiler’s return pipe, so that, when necessary, it can be cleaned.
This filter will protect the boiler from the dirt coming from the
heating system.
When sizing pumps, it is necessary to take into consideration
the pressure losses which occurin the primary circuit.
1.6 - INSTALLATION ON EXISTING HEATING SYSTEMS
1.5 - STANDARD CODES FOR
INSTALLATION
The appliance must be installed in compliance to the instructions
contained in this manual.
Theinstallationmustbe carriedoutby acompetentqualied
engineer, whom will assume the responsibility of complying to
allthelocaland/ornationalregulationspublishedintheofcial
publications, as well as all the applicable codes of practice.
Before installing the appliance please contact the gas supply
company.
The installation must be carried in accordance to the codes of
practice, the regulations and the requirements hereby indicated
which constitute an indicative list, but not a complete one, as
these continue to undergo evolve devolpments.
Moreover, the boiler must be installed in accordance to all the
regulations regarding the boiler room, the building regulations
and the prescriptions regarding central heating plants in force
in the country where the boiler is installed.
The appliance must be installed, commissioned and serviced
according to the regulations in force. This is also valid for the
hydraulicsystem,theueoutletsystemandtheboilerlocation
room.
Failure to comply with these rules will
nullify the warranty
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unical MODULEX EXT 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unical MODULEX EXT 250 in the language / languages: English as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Unical MODULEX EXT 250

Unical MODULEX EXT 250 Installation Guide - Dutch - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info