652324
55
Zoom out
Zoom in
Previous page
1/56
Next page
55
Servicing schedule
Second phase - Cleaning
Remove the gaskets and the burners.
• Performcleaningoftheburnersonlybyblowing,withcom-
pressed air, acting from the “side flame”
• VerifyvisuallythestateofthespotweldingsoftheLproles
and the burner mesh.
The burner gaskets must be replaced at
every cleaning operation.
Wash with water the combustion chamber, avoiding to wet
the electrical harness
During this operation it will be necessary to ascertain that
the condensate drain pipe is free, so that the washing water
does not come out from the inspection hole.
Blow the combustion chamber with compressed air, trying to
remove all the dirt still fixed to the fins.
Once the washing of the aluminium sections is finished, make
sure the siphon for the evacuation of the condensate is free:
if necessary clean it
Ispect the smoke evacuation pipe and the chimney
Third phase – Reassembly
When reassembly, proceed in the reverse
order, taking care to tight the fixing screws
of the mixer/fan group to the body, with a
tightening torque of 13 Nm
WARNING
AT EACH MAINTENANCE OPERATION IT IS
COMPULSORY TO REPLACE THE SEALING
GASKETS ON EACH BURNER.
Spare parts code:
00251482 - KIT OF BURNER GASKETS
MODULEX (5 pz.)
95262823 - KIT BURNER MODULEX E8
• Beforelightingtheboilermakesurethesiphonhasbeenlled
with water.
• Beforeopening the gas feedingcock,previously unloosed,
make sure it is well tight. To do this open the gas cock and
check with a soap solution.
• Whenasingleburnerisstarted,checkimmediatelyforthe
soundness between its gas valve and the relevant premixing
chamber.
• Performthecombustionanalysischeckitsparameters.
• Makesurethatallthepressuretestnipples,previously
opened, have been closed.
• Afterthecleaningoftheboilerbodyand/ortheburners,re
position the burners in their seats.
• Positionthenewgasketsingraphite
COMPRESSED AIR
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unical MODULEX EXT 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unical MODULEX EXT 250 in the language / languages: English as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Unical MODULEX EXT 250

Unical MODULEX EXT 250 Installation Guide - Dutch - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info