576656
56
Zoom out
Zoom in
Previous page
1/59
Next page
53
ULGD 3.8 A1
DE
AT
CH
Programme auswählen
HINWEIS
Wird eine Batterie im Spannungsbereich von
3,7–7,3 V erkannt, sind die Progr
amme 2–3–4
wählbar. Der Ladefortschritt erfolgt automatisch.
Abhängig vom gewählten Programm ist die
Ladekennlinie Spannungs-, Zeit-, und Tempera-
turüberwacht. Mit Diagnoseprogramm, Wieder-
belebungsmodus und Erhaltungsladung.
(siehe Prinzipdarstellung Programm 3 Abb C).
Programm max. (V) max. (A)
1 6 V 7,3 V 0,8 A
2
*
14,4 V 0,8 A
3
*
14,4 V 3,8 A
4
*
14,7 V 3,8 A
Programm 1 „6 V“ (7,3 V / 0,8 A)
Zum Laden von 6 V-Batterien mit einer Kapazität
geringer als 14 Ah.
Drücken Sie die Programmwahltaste
, um
Programm 1 auszuwählen. Das Symbol „6 V“
wird im LC-Display angezeigt. Während des
Ladevorgangs blinkt die Ladeanzeige und
zeigt, wie weit der Ladevorgang fortgeschritten
ist (1–4 Balken). Wenn die Batterie voll geladen
ist, zeigt die Zustandsanzeige 4 Balken. Das
Blinken stoppt und das Gerät schaltet automa-
tisch in die Erhaltungsladung.
Programm 2 „12 V“
(14,4 V / 0,8 A)
Zum Laden von 12 V-Batterien mit einer Kapazität
geringer als 14 Ah.
Drücken Sie die Programmwahltaste
, um
Programm 2 zu wählen. Das Symbol wird
im LC-Display angezeigt. Während des Lade-
vorgangs blinkt die Ladeanzeige und zeigt,
wie weit der Ladevorgang fortgeschritten ist
(1–4 Balken). Wenn die Batterie voll geladen
ist, zeigt die Zustandsanzeige 4 Balken. Das
Blinken stoppt und das Gerät schaltet automa-
tisch in die Erhaltungsladung.
Programm 3 „12 V“
(14,4 V / 3,8 A)
Zum Laden von 12 V-Batterien mit einer Kapazität
von 14 Ah –120 Ah.
Drücken Sie die Programmwahltaste
, um
Programm 3 auszuwählen. Das Symbol
wird im LC-Display angezeigt. Während des
Ladevorgangs blinkt die Ladeanzeige und
zeigt, wie weit der Ladevorgang fortgeschritten
ist (1–4 Balken). Wenn die Batterie voll gela-
den ist, zeigt die Zustandsanzeige 4 Balken.
Das Blinken stoppt und das Gerät schaltet
automatisch in die Erhaltungsladung.
Programm 4 „12 V“
(14,7 V / 3,8 A)
Zum Laden von 12 V-Batterien mit einer Kapazität
von 14 Ah –120 Ah unter kalten Bedingungen
oder zum Laden von AGM-Batterien.
Drücken Sie die Programmwahltaste
, um
Programm 4 auszuwählen.
HINWEIS
Dieses Programm startet ggf. mit einer
geringen Zeitverzögerung. Das Symbol
wird im LC-Display angezeigt. Während des
Ladevorgangs blinkt die Ladeanzeige und
zeigt, wie weit der Ladevorgang fortgeschritten
ist (1–4 Balken). Wenn die Batterie voll
geladen ist, zeigt die Zustandsanzeige
4 Balken. Das Blinken stoppt und das Gerät
schaltet automatisch in die Erhaltungsladung.
Erhaltungsladung
Wie unter Programme beschrieben verfügt das
Gerät über eine automatische Erhaltungsladung.
Abhängig vom Spannungsabfall der Batterie – durch
Selbstentladung – reagiert das Ladegerät mit unter-
schiedlichem Ladestrom. Die Batterie kann über längere
Zeit an das Ladegerät angeschlossen bleiben.
IB_102626_ULGD3.8A1_FI_SE_DK_BE_NL.indb 53 06.08.14 08:48
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ultimate speed ULGD 3.8 A1 - IAN 102626 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ultimate speed ULGD 3.8 A1 - IAN 102626 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info