412224
1
Zoom out
Zoom in
Previous page
1/9
Next page
GM-2300 JOYSTICK
UK DE
Fig. 1 Fig.2
Introduction
This manual is intended for users of the‘ TRUST GM-2300 JOYSTICK‘. The joystick has 4
independent fire buttons, a hatswitch and 3 axes. The joystick calibrates automatically and
therefore works immediately. It can be installed very simply, via the USB port.
Safety
Before use, carefully read the following instructions:
1. The joystick does not require any special maintenance. For cleaning the joystick, use a
slightly dampened, soft cloth.
2. Do not use any aggressive cleansing agents such as petrol or turpentine. These may
affect the material.
3. Never attempt to repair the device yourself.
Connecting the joystick
1. Start up the computer.
2. Put the USB plug of the joystick into the USB port of your computer.
3. The system will autodetect and install the joystick.
4. Your joystick is now installed.
Note: To be sure, first remove all other, previously installed controllers.
Buttons
Use this table in combination with Figure 1.
Button Description
1 hatswitch
2 Fire button 2
3 Fire button 3
4 Fire button 4
5 Fire button 1
6 Axis 3
Testing
1. Click ‘Start’ in your tool bar.
2. Go to ‘Settings’.
3. Click ‘Configuration screen’.
4. Double-click the pictogram ‘game control’. A screen as in Figure 2 will appear.
5. Click ‘properties’.
6. Click ‘Test’ to test the joystick
Troubleshooting
Problem Cause Possible solution
Not properly connected. Check connection.
More than one controller
have been installed.
Remove both the joystick
and all other controllers.
Reinstall the joystick.
In the configuration
screen, section game
control, the status of the
joystick reads ‘not
connected’.
The gameport of the sound
card was not installed
properly or is in conflict with
another appliance.
Reinstall the soundcard or
consult the manual of the
soundcard in question.
The USB port was
deactivated in the PC setup
(BIOS).
Consult the manual of your
PC in order to activate the
USB.
Wrong Windows version. Use Windows 98 or higher.
The USB drivers of the
computer have not been
installed.
This usually occurs after
having reinstalled Windows.
Consult the manual of your
PC.
Joystick refuses because
of problems with the USB
port.
Consult the online Trust site
for more information about
USB.
Go to:
www.trust.com/customercar
e/help/usb
USB cable was extended.
The product doesn’t
function (properly)
anymore.
USB cable length is limited.
The maximum lies between
3 and 5 meter if no special
USB repeater is used.
Do not use a USB extension
cable.
Problem not listed here. FAQ update available
online.
Go to www.trust.com/12629
for FAQ and other product
information.
If you still have problems after trying these solutions, please contact one of the Trust Customer
Care Centres (www.trust.com/support).
Einleitung
Dieses Handbuch wendet sich an die Benutzer des TRUST GM-2300 JOYSTICK. Dieser
Joystick verfügt über vier voneinander unabhängige Feuerknöpfe, einen HAT-Schalter und
drei Achsen. Er wird automatisch kalibriert und ist daher sofort einsetzbar. Für die Installation
wird eine einfache Methode über den USB-Port verwendet.
Sicherheitshinweise
Lesen Sie sich die folgenden Hinweise vor der Benutzung gut durch:
1. Der Joystick benötigt keine spezielle Wartung. Reinigen Sie den Joystick mit einem
angefeuchteten weichen Tuch.
2. Verwenden Sie zum Reinigen des Geräts keine aggressiven Mittel, wie Benzin oder
Terpentin. Diese können schädlich für das Material sein.
3. Führen Sie keine Reparaturen an diesem Gerät aus.
Anschließen
1. Schalten Sie den Computer ein.
2. Stecken Sie den USB-Stecker des Joysticks in den USB-Anschluss des Computers.
3. Der Jjoystick wird gefunden und automatisch installiert.
4. Der Joystick ist installiert.
Hinweis: Entfernen Sie vorsichtshalber zuerst alle anderen bereits installierten Controller.
Bedienelemente
Verwenden Sie diese Tabelle in Kombination mit Abbildung 1.
Element Beschreibung
1 HAT-Schalter
2 Feuerknopf 2
3 Feuerknopf 3
4 Feuerknopf 4
5 Feuerknopf 1
6 Achse 3
Testen
1. Klicken Sie auf die Schaltfläche ‘Start’ auf der Taskleiste.
2. Gehen Sie zu den 'Einstellungen'.
3. Klicken Sie auf ‘Systemsteuerung’.
4. Doppelklicken Sie auf das Symbol ‘Gamecontroller'. Ein Fenster wie in Abbildung 2
erscheint.
5. Klicken Sie auf ‘Eigenschaften’.
6. Klicken Sie auf ‘Test’, um den Joystick zu testen.
Fehlerbehebung
Problem Mögliche Ursache Mögliche Lösung
Das Gerät ist nicht richtig
angeschlossen.
Überprüfen Sie den
Anschluss.
Es sind mehrere Controller
installiert.
Deinstallieren Sie den
Joystick und auch alle
anderen Controller.
Installieren Sie den Joystick
noch ein Mal.
In der Systemsteuerung in
der Kategorie
„Gamecontroller“ ist der
Status des Joysticks
„nicht verbunden“.
Der Gameport der
Soundkarte ist nicht richtig
installiert oder hat einen
Konflikt mit einem anderen
Gerät.
Installieren Sie die
Soundkarte erneut oder
ziehen Sie die Anleitung der
betreffenden Soundkarte zu
Rate.
Der USB-Port ist im PC-
Setup (BIOS) ausgeschaltet.
Ziehen Sie das Handbuch
Ihres PC zu Rate, um den
USB-Port einzuschalten.
Falsche Windows-Version. Verwenden Sie Windows 98
oder höher.
Die USB-Treiber des
Computers sind nicht
installiert.
Das passiert oft, nachdem
Windows neu installiert
wurde. Ziehen Sie die
Anleitung des Computers zu
Rate.
Der Joystick funktioniert
nicht aufgrund von
Problemen mit dem USB-
Port.
Auf der Trust-Website im
Internet finden Sie weitere
Informationen zu USB.
Besuchen Sie
www.trust.com/customercar
e/help/usb
Das USB-Kabel wurde
verlängert. Jetzt
funktioniert das Gerät
nicht mehr oder nicht
mehr richtig.
Die zulässige USB-
Kabellänge ist begrenzt. Das
Maximum liegt zwischen 3
und 5 Metern, wenn kein
spezieller USB-
Zwischenverstärker
verwendet wird.
Verwenden Sie kein USB-
Verlängerungskabel.
Das Problem wird hier
nicht genannt.
Die neueste Version der
FAQ steht im Internet zur
Verfügung.
Besuchen Sie
www.trust.com/12629, wo
Sie die FAQ und andere
Produktinformationen
nachlesen können.
Wenn das Problem mit Hilfe der vorgeschlagenen Lösungen nicht behoben werden kann,
wenden Sie sich an eine der Trust-Kundenbetreuungsstellen (www.trust.com/support).
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trust predator th400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trust predator th400 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info