629588
11
Zoom out
Zoom in
Previous page
1/44
Next page
11
– Connect gas supply pipe
Ø 10 mm to regulator outlet as
per the applicable installation
instructions for olive screw
connections. When tighten-
ing, carefully use a second
wrench to counterhold on the
key surfaces provided for this
purpose.
– Check inlet of SecuMotion gas
pressure regulator for leaks
(e.g. using a leak test spray in
accordance with DIN 14291).
– After installing the regula-
tor, check gas system for
leaks (see “Checking the low
pressure area for leaks“) and
check the operation of the gas
flow monitor (see “Making
sure the gas flow monitor is
working properly“).
Checking the low pressure
area for leaks
Test must be conducted
by a technician!
– Turn off all consumers.
– Open shut-off valves.
– Remove the threaded cap
from the test connection (b)
and connect the test pump
with test hose onto the test
connection.
– Remove the test valve’s (c)
protective cap and use an
open-end wrench (6 mm) to
turn the valve by 90 degrees in
the clockwise direction.
b
c
– Conduct leak test (in Germany
according to G 607).
– If the gas system is leaking,
close gas extraction valve,
repair gas system and leave
the gas extraction valve closed
for the time being.
– After check is complete, make
sure to turn the test valve back
(90 degrees counterclockwise
until it stops) and replace the
protective cap.
– Screw the threaded cap back
onto the test valve.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Truma SecuMotion Gastank at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Truma SecuMotion Gastank in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info