753932
12
Zoom out
Zoom in
Previous page
1/16
Next page
12 EN
compressor PCPS 10-1100
Checking the pressure
1. Connect the compressed-air gun(12) to the compressor
(see chapter Connecting the compressed-air gun).
2. Check whether a valve adapter is required for the planned
activity and, if so, connect it.
3. Connect the compressed-air gun directly to the item to be
inflated by means of the mounted valve adapter.
ðThe current pressure of the connected item will be
indicated on the pressure gauge(10).
Inflating
1. Switch the device on by setting the on/off switch(2) to
position I.
ðThe compressor starts to build up pressure immediately
and is ready for use.
2. Pull and hold the trigger(14) until the desired pressure has
been reached on the pressure gauge(10).
14
3. Switch the device off by setting the on/off switch(2) to
position 0.
Deflating
If the existing pressure is too high or if the desired pressure was
exceeded during inflation, the excess air can be released. To do
so, please proceed as follows:
1. Press and hold the deflation valve(11) until the pressure
has been reduced to the desired value displayed on the
pressure gauge(10).
11
2. Disconnect the quick-release lever or any adapter used
from the inflated item.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Switch the device off.
Hold onto the mains plug while pulling the power cable out
of the mains socket.
If required, allow the device to cool down.
Disconnect any adapters used from the compressed-air
gun(12).
Disconnect the compressed-air gun(12) from the
compressor (see chapter Disconnecting the
compressed-air gun).
Clean the device according to the Maintenance chapter.
Store the device according to the Storage chapter.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PCPS 10-1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PCPS 10-1100 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PCPS 10-1100

Trotec PCPS 10-1100 User Manual - German - 17 pages

Trotec PCPS 10-1100 User Manual - Dutch - 16 pages

Trotec PCPS 10-1100 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info