756399
8
Zoom out
Zoom in
Previous page
1/10
Next page
7 EN
Operating manual – Barbeque thermometer BT40
Types of food with preselected target temperatures
Food Display
indication
Well
done
WELL
Medium
well
M WELL
Medium
MEDIUM
Medium
rare
M RARE
Rare
RARE
BEEF 77°C 74°C 71°C 66°C 63°C
LAMB 77°C 74°C 71°C 63°C -
VEAL 77°C 71°C 66°C 63°C -
HAM-
BURGER
77°C - - - -
PORK 77°C 74°C 71°C - -
FISH 63°C - - - -
TURKEY 74°C - - - -
CHICKEN 74°C - - - -
Setting the target temperature manually
1. Select the food and the cooking level for which you want to
change the target temperature.
2. Press and hold the MODE button (26) until the target
temperature indication TARGET TEMP(15) flashes.
3. Press the MIN button (25) or the SEC button (22) until the
desired target temperature is set. By holding these buttons,
the target temperature can be increased or decreased more
quickly.
4. Press the MODE button (26) again to confirm the set target
temperature.
Setting the timer
The device is equipped with a timer which can be used
independently of the temperature measuring probe. The
maximum selectable time is 99:59 (MIN:SEC).
1. To set a countdown, press the MIN (25) or SEC button (22)
until the desired time is displayed. By holding these buttons,
the time can be increased or decreased more quickly.
2. Press the GO/STOP/RST button (20) to activate the timer.
ðWhen the timer has expired, a continuous acoustic
signal is emitted and the indication for minutes/seconds
flashes.
3. Press the GO/STOP/RST button (20) to confirm.
ðThe acoustic signal is muted and the display stops
flashing.
Setting the stopwatch
The device is equipped with a stopwatch which can be used
independently of the temperature measuring probe.
1. Press the GO/STOP/RST button(20).
ðThe stopwatch starts running.
2. Press the GO/STOP/RST button (20) again to pause the
stopwatch.
3. Hold the GO/STOP/RST button (20) until the time is reset to
0M:00S.
Switching between °C and °F indication
1. Press the MODE button (26) to switch between °C and °F
for temperature indication.
Attaching the device with the magnetic holder or Velcro
strap
Caution!
Keep the base station and the hand-held receiver away
from hot surfaces. The devices can be damaged by
heat.
You can attach the hand-held receiver and/or the base
station to magnetic surfaces (e.g. refrigerator door) using
the magnetic holder.
You can attach the base station e.g. to the oven handle or
barbecue leg using the Velcro strap contained in the scope
of delivery.
To do so, pull the Velcro strap through the two
eyelets (13) at the bottom of the base station.
Fasten the Velcro strap in a way that the base station
cannot shift.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec BT40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec BT40 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec BT40

Trotec BT40 User Manual - German - 10 pages

Trotec BT40 User Manual - Dutch - 10 pages

Trotec BT40 User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info