756401
6
Zoom out
Zoom in
Previous page
1/8
Next page
6 EN
food thermometer BP5F
Switching on and selecting the measuring mode
Note:
Note that moving from a cold area to a warm area can lead to
condensation forming on the device's circuit board. This
physical and unavoidable effect can falsify the measurement. In
this case, the display shows either no measured values or they
are incorrect. Wait a few minutes until the device has become
adjusted to the changed conditions before carrying out a
measurement.
Proceed as follows to switch between measurement with
infrared and measurement with temperature probe:
1. Press any button to switch on the device.
2. Press the MEAS button(6) to switch between
measurement with infrared and measurement with
temperature probe.
ðIf the symbol for measurement with temperature probe
is displayed on the indication(13), the corresponding
measuring mode is selected.
ðIf the symbol is not displayed, the infrared measuring
mode is selected.
Measuring with infrared
Info
Vapours and smoke can influence the measurement.
Info
Ensure that the surface to be measured is free of dust,
dirt, ice or similar substances.
Info
To be able to gain exact measurement results on
surfaces which reflect heavily, stick matt masking tape
to the surface or apply matt black paint with a very
high and known degree of emission.
Info
Note the 20:1 ratio of the distance to the measuring
spot diameter. The larger the distance to the object,
the larger the measuring spot diameter and hence, the
less precise the measured result.
1. Switch the device on and select the infrared measuring
mode.
2. Point the device at the object to be measured and hold
down the measurement button(8).
ðThe SCAN indication(21) appears on the display. The
device performs a measurement.
ðThe currently measured value is indicated.
3. Let go of the measurement button(8) again.
ðThe HOLD indication(20) appears on the display. The
device stops measuring.
ðThe last value measured is shown.
Measuring with temperature probe
1. Press the temperature probe lock(3) and fold out the
temperature probe(4).
2. Insert the temperature probe(4) into the object to be
measured by approx. 1 cm.
3. Switch the device on and select the temperature probe
measuring mode.
4. Press the MEAS button(5).
ðThe currently measured value is indicated.
Note
The temperature probe is not suitable as an ice pick
and should never be pricked into frozen objects
forcefully to prevent damages to the device.
Setting the timer
The device allows you to set a timer. After the set time has
passed, a beep is emitted for 30 seconds.
Please proceed as follows to set the timer:
1. Press the TIMER button(6) to open the timer menu.
2. The timer period is displayed.
3. Press and hold the TIMER button(6) for 2 seconds to
switch between seconds, minutes and hours.
ðThe currently selected time format flashes.
4. Press and hold the SET button(2) to set the corresponding
value.
5. Press the measurement button(8) to start the timer.
ðThe timer starts and remains active in the background,
even if you switch to another menu or the device turns
off because of non-use.
ðAfter the set time has passed, a beep is emitted for
30 seconds. Press any button to switch off the beep.
The device switches off after approx. 20 seconds of non-use.
Changing the unit °C / °F indication
The default setting for the temperature unit is °C.
Please proceed as follows to change the temperature unit at the
device:
1. Press the SET button(2) to change the unit.
ðThe currently selected unit °C or °F will be indicated in
the temperature unit indication(12) of the display(1).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec BP5F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec BP5F in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec BP5F

Trotec BP5F User Manual - German - 8 pages

Trotec BP5F User Manual - Dutch - 8 pages

Trotec BP5F User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info