756403
8
Zoom out
Zoom in
Previous page
1/10
Next page
8 EN
pyrometer BP21
Switching the laser pointer on or off
Ex works the laser pointer is switched off.
Danger
Please observe that with a switched-on laser the laser
pointer will go on as soon as you press the
measurement button(6) or activate continuous
measurement.
Warning of laser radiation
Class 2 laser radiation.
Lasers of class 2 only radiate in the visible range and
during continuous wave operation (lasting beam) no
more than 1 milliwatt (mW) of output will be emitted.
Looking directly into the laser beam for a longer period
of time (more than 0.25seconds) can cause damage to
the retina.
Avoid looking directly into the laser beam. Never look
into the laser beam using optical aides. Do not
suppress the winking reflex when looking into the laser
beam unintentionally. Never point the laser beam at
people or animals.
1. Press the Laser button(4) when the device is in operation.
ðThe laser indication(19) appears on the display(1).
ðThe laser pointer is switched on.
2. Press the laser button(4) again to switch the laser pointer
off.
ðThe laser indication(19) is no longer displayed.
ðThe laser pointer is switched off, memorising the
selected settings.
Switching the display illumination on or off
The display illumination is switched off by default and can be
switched on or off as needed by pressing the lamp button(2).
For this purpose, the device must be in operation.
The device memorizes the selected setting when switching off.
Further setting options
1. By use of the Mode key(3) you can access the extended
choice of settings. The alarm threshold and temperature
unit can be selected here, for instance.
2. Enable the device file by pressing the measurement
button(6). Press the Mode key(3) several times to reach
the desired setting:
Number Menu option Description
1x Setting the
degree of
emission
Further information regarding the
degree of emission can be found in
the chapter "Information about the
device").
2x Setting the
temperature
unit
The measured value can be displayed
in °C or °F.
3x Activating
maximum or
minimum
value
According to the selection, either the
highest or the lowest measured value
will be displayed.
4x Activating
continuous
measurement
The symbol for continuous
measurement(20) flashes on the
display. By pressing the laser
button(4) (up) and the lamp
button(2) (down), the continuous
measurement function can be
activated(ON) or deactivated(OFF).
Adjust the settings as required and
press the measurement button(6) to
activate it. With activated continuous
measurement you can adjust the
degree of emission to changing
grounds by means of the laser
button(4) (up) and the lamp
button(2) (down). On the other hand,
it is no longer possible to switch the
background illumination or the laser
beam on and off. For this reason,
select the corresponding setting
before activating continuous
measurement. By pressing the
measurement button(6), continuous
measurement can be deactivated
again.
5x Enabling/
disabling the
upper alarm
threshold
Upon exceeding the selected upper
alarm value, an acoustic alarm signal
is emitted.
6x Entering the
upper alarm
value
Here you can enter the value for the
upper alarm threshold.
7x Enabling/
disabling the
lower alarm
threshold
Upon exceeding the selected lower
alarm value, an acoustic alarm signal
is emitted.
8x Entering the
lower alarm
value
Here you can enter the value for the
lower alarm threshold.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec BP21 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec BP21 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec BP21

Trotec BP21 User Manual - German - 10 pages

Trotec BP21 User Manual - Dutch - 10 pages

Trotec BP21 User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info