Manual Tristar KZ-1228 (page 8 of 88) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish)

483979

Zoom out

Zoom in

1/88

6. Pour the coee powder into the permanent lter.

7. Insert the lter compartment cover into the lter compartment and

close the lter compartment.

8. Place the glass pot on the hotplate.

9. Press the Grind O button to switch o the grinding mechanism of

the coee machine.The Grind O button lights up.

10. Press the On/O button to switch the device on. The On/O button

lights up.

11. As soon as you have pressed the On/O button, the brewing

procedure begins.

12. After the brewing procedure, you can take the glass pot from the

hotplate and serve the coee.

13. After the brewing procedure, the hotplate remains on for another two

hours and then switches o automatically.

14. If you would like to turn o the coee machine before the two hours

have passed, press the On/O button.

15. Clean the device after use as described in the "Care and Descaling"

chapter. The coee machine has a non-drip valve. You can also take the

glass pot from the hotplate during the brewing procedure and pour

yourself a cup of coee. But be careful: You should place the glass pot

back on the hotplate within 20 seconds to prevent the coee lter from

overowing with water!

Timer Function

The coee machine has an automatic coee brewing function. You can

select a starting time at which the coee machine automatically starts the

brewing procedure. To do so, take the following steps.

1. Fill the coee machine as described in the "Brewing Coee with Freshly

Ground Beans" and "Brewing Coee with Powder Coee" sections

according to whether you would like to brew coee with freshly

ground beans or with powder coee.

2. You should now set the starting time at which the coee machine

automatically starts the brewing procedure by pressing the Program

button for 3 seconds until the Program button ashes. Now set the

automatic starting time using the Hour and Minute buttons.

3. Press the Program button again to conrm your entry. The Program

button will now light up without ashing.

4. The current time then appears on the display again.

5. The brewing or grinding procedure now starts at the set time.

Tip: You can also start the grinding or brewing procedure at any time

before the set starting time. To do this, press the Program button once

to switch of the timer and then press the On/O button to start the

grinding or brewing procedure manually.

6. After the brewing procedure, you can take the glass pot from the

hotplate and serve the coee.

7. After the brewing procedure, the hotplate remains on for another two

hours and then switches o automatically.

8. If you would like to turn o the coee machine before the two hours

have passed, press the On/O button.

9. Clean the device after use as described in the "Care and Descaling"

chapter.

CHANGING WATER FILTER

To produce a more aromatic coee avour, the device has a water lter

which is inserted in the water reservoir. If the symbol and the word

"FILTER" are shown on the display, the water lter should be replaced.

1. Open the water reservoir lid and pull out the water lter by its bracket.

2. Open the lower part of the water lter bracket, take out the water lter

and dispose of it.

Instruction manual

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tristar KZ-1228 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tristar KZ-1228 Manual

Product: