618960

Trebs Ice Crusher model 21114 Manual

12
Zoom out
Zoom in
Previous page
1/14
Next page
12
English
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS.
1. To protect against risk of electrical hazards, do not immerse the Comfortice Ice Crusher in water or other
liquids.
2. Unplug from outlet when not in use, before assembling or disassembling, and before cleaning.
3. Avoid contacting moving parts. Never place fingers or other utensils into feed or discharge areas.
4. The Comfortice Ice Crusher has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit, contact a qualified
electrician. Do not modify the plug in any way.
5. Do not operate the Comfortice Ice Crusher or any electrical equipment with a damaged cord or plug, or after
the unit malfunctions, is dropped or damaged cord or plug, or after the unit malfunctions, is dropped or
damaged in any manner. Return it to the nearest authorized service facility for examination, repair or
adjustment.
6. When the Comfortice Ice Crusher is used by or near children, close supervision is necessary.
7. Do no use outdoors.
8. Do not let cord hang over edge of table or counter, or touch hot surfaces.
9. Check feeder chute for presence of foreign objects before using.
10. Use only attachments that are included in the packaging of the Comfortice Ice Crusher. The use of other
attachments may cause fire. Electric shock or injury.
11. Put this list in a safe place, do not discard.
USE
1. Place the Ice Crusher (clear bowl) packed with the unit under the bottom opening of the ice crusher. Plug the
unit in and set the ON/OFF power switch to the ON position. NOTE: Ice crusher will not operate unless Ice
Container is secured into position.
2. To begin crushing ice, drop cubes into feeder chute opening on
3. top of unit. Blades of crusher unit are self feeding. DO NOT ATTEMPT TO PUSH CUBES INTO BLADES WITH
HAND OR INSTRUMENT.
4. If a large cube should become lodged in the crushing unit so that blades cannot reach it, set power switch to
the OFF position and unplug unit from outlet.
Then pour warm water down through feeder chute until lodged cube is melted or falls free. Plug unit back into
outlet, set the power switch to the ON position, and resume feeding cubes through the feeder chute.
PARTS 1
1. ice Chute
2. Housing
3. Switch
4. Ice Container (3 liter capacity)
2
3
… 12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trebs Ice Crusher model 21114 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trebs Ice Crusher model 21114 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info