485471

Trapeze smart mobile Mobility System Software 7.3 Manual

557
Zoom out
Zoom in
Previous page
1/558
Next page
Boot Prompt Commands
Boot Prompt Commands
25 – 535
The following is an example of a boot profile from an MXR-2 that is booted with a software image
downloaded from a TFTP server. In the example, when the MXR-2 boots, it downloads a system
image file called bootfile located on a TFTP server with address 172.16.0.1.
boot> show
BOOT Index: 0
BOOT TYPE: n
DEVICE: emac1
FILENAME: bootfile
HOST IP: 172.16.0.1
LOCAL IP: 172.16.0.21
GATEWAY IP: 172.16.0.20
IP MASK: 255.255.255.0
FLAGS: 00000000
OPTIONS: run=nos
Table 25– 1 describes the fields in the display.
See Also
● change on page 25-527
● create on page 25-528
● delete on page 25-529
● dhcp on page 25-529
● next on page 25-533
Table 25– 1. Output for show
Field Description
BOOT Index Boot profile slot, which can be a number from 0 to 3.
BOOT TYPE Boot type:
❑ c—Compact flash. Boots using nonvolatile storage or a flash card.
❑ n—Network. Boots using a TFTP server.
DEVICE Location of the system image file:
❑ c:—Nonvolatile storage area containing boot partition 0
❑ d:—Nonvolatile storage area containing boot partition 1
❑ e:—Primary partition of the flash card in the flash card slot
❑ f:—Secondary partition of the flash card in the flash card slot
❑ boot0—boot partition 0
❑ boot1—boot partition 1
When the boot type is Network, the device can be one of the following:
❑ emac1—Port 1 on an MXR-2
❑ emac2—Port 2 on an MXR-2
❑ mgmt or tsec0—The 10/100 port labelled Mgmt on an MX-200 or MX-216
HOST IP For network booting, the IP address of the host with the system image.
LOCAL IP For network booting, the IP address of the MX. If the DHCP option is enabled,
this does not need to be specified.
GATEWAY IP For network booting, the default router (gateway) used by the MX. If the DHCP
option is enabled, this does not need to be specified.
IP MASK For network booting, the subnet mask. If the DHCP option is enabled, this does
not need to be specified.
FILENAME System image file name.
FLAGS Number representing the bit settings of boot flags to pass to the booted system
image.
OPTIONS String up to 128 bytes of boot options to pass to the booted system image.
… 557


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trapeze smart mobile Mobility System Software 7.3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trapeze smart mobile Mobility System Software 7.3 in the language / languages: English as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info