664708

TP-LINK TL-WR810N Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
Repeater
Client (TV Adapter)
1 Switch the Operation Mode to Client and plug the router into an
electrical outlet within the signal range of your host AP.
2 Connect your device to the router via an Ethernet cable.
3 Launch a web browser and type http://tplinkwifi.net in the address bar.
Enter admin (in lowercase) for both username and password to log in.
4 Click Quick Setup on the left panel and click Next to start.
5 Click Survey to find your host network and click Connect. Enter the host
network’s password in the Wireless Password field and click Next.
6 Select the LAN IP type of the router or leave the default setting Smart IP
for most cases, and then click Next.
7 Click Finish to complete the configuration.
8 Connect your wired-only device to the router’s LAN or LAN/WAN port
using an Ethernet cable and enjoy the Internet.
1 Switch the Operation Mode to Repeater and plug the router into an
electrical outlet near your host AP.
2 Connect your device to the router wirelessly or via an Ethernet cable. The
Wi-Fi network name and password are on the router’s label.
3 Launch a web browser and type http://tplinkwifi.net in the address bar.
Enter admin (in lowercase) for both username and password to log in.
4 Click Quick Setup on the left panel and click Next to start.
5 Click Survey to find your host network and click Connect. Enter the host
network’s password in the Wireless Password field and click Next.
6 Select the LAN IP type of the host AP or leave the default setting Smart IP
for most cases, and then click Next.
7 Click Finish to complete the configuration.
8 Relocate the router about halfway between your host AP and the Wi-Fi
dead zone.
Tips: The extended network shares the same network name and password
as those of your host network.
Q1. What can I do if I cannot access the Internet?
• If using a cable modem, unplug the Ethernet cable and reboot the
modem. Wait until its Online LED is on and stable, and then reconnect
the Ethernet cable to the modem.
• If you're in a hotel room or on a trade show, the Internet may be limited
and requires that you authenticate for the service or purchase the
Internet access.
• If your Internet access is still not available, contact TP-LINK Technical
Support.
Q4. What can I do if I forgot my wireless network password?
• If you have not changed the default Wireless Password, it can be found
on the label of the router.
• Connect a computer to the router via an Ethernet cable. Log into the
Web Management page, and go to Wireless > Wireless Security to
retrieve or reset your wireless password.
Q3. What can I do if I forgot my web management password?
Refer to FAQ > Q2 to reset the router, and then use the default admin
(all lowercase) for both username and password to log in.
Q5. What can I do if my wireless signal is unstable or weak?
It may be caused by too much interference.
• Set your wireless channel to a different one.
• Choose a location with less obstacles that may block the signal between
the router and the host AP. An open corridor or a spacious location is
ideal.
• Move the router to a new location away from Bluetooth devices and
other household electronics, such as cordless phone, microwave, and
baby monitor, etc., to minimize signal interference.
• When in Repeater mode, the ideal location to place the router is halfway
between your host AP and the Wi-Fi dead zone. If that is not possible,
place the router closer to your host AP to ensure stable performance.
Q2. How do I restore the router to its factory default settings?
With the router powered on, press and hold the Reset button until
the LED starts flashing, and then release the button.
©2016 TP-LINK
300Mbps TL-WR810N
LAN or LAN/WAN
OR
OR
Other
Device
TV
Host AP
Internet
300Mbps TL-WR810N
Host AP
Internet
Host network name
and password
Host network name
and password
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TL-WR810N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-WR810N in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TL-WR810N

TP-LINK TL-WR810N User Manual - English - 135 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info