605831
1
Zoom out
Zoom in
Previous page
1/2
Next page
300Mbps Wireless N Nano Router
Quick
Installation Guide
MODEL NO. TL-WR802N
During Travel
Other Information
REV1.0.4
7106505657
Tips: In this mode, devices can connect to the Internet via the LAN port and wireless simultaneously.
1 Connect the router according to steps A to D in the left diagram.
2 Wait until the router boots up, about 30 seconds, then use the default Wi-Fi Name and Password printed
on the Wi-Fi Info Card to connect to the router.
Check the Internet connection on your laptop or smartphone, and please note that:
- If you can access Internet without any restriction, no other configuration is required.
- If you're redirected to a splash page authentication, please complete it to access the Internet.
- If you want to customize your own wireless network, continue with the steps below.
3 Launch a web browser and type http://tplinkwifi.net into the address bar. Enter admin (in lowercase) for
both user name and password.
4 Click Quick Setup on the left panel, and click Next to start configuring the router. Select Wireless Router
mode and click Next.
5 Select the WAN Connection Type of your Internet Service Provider and follow the screen instructions to
configure the parameters. When using the router in a hotel room or a small office, please select Dynamic
IP.
6 On the Wireless screen, either keep the default Wireless Network Name and Wireless Password or
customize them, then click Next.
7 Click Finish to complete the configuration.
8 Please note the additional steps to be completed once the Nano router is rebooted.
1 Connect the router according to steps A to C in the left diagram.
2 Wait until the router boots up, about 30 seconds, then use the default Wi-Fi Name and Password printed
on the Wi-Fi Info Card to connect to the router.
3 Launch a web browser and type http://tplinkwifi.net into the address bar. Enter admin (in lowercase) for
both user name and password.
4 Click Quick Setup on the left panel, and click Next to start configuring the router. Select Hotspot Router
mode and click Next.
5 Select the
WAN Connection Type of your Internet Service Provider and follow the screen instructions to
configure the parameters. When using the router in a hotel room or a small office, please select
Dynamic
IP
.
6 Select the public Wi-Fi that you want to connect to, and click Next.
7 Type in the public Wi-Fi password when prompted. In the AP settings section, customize your Wi-Fi
network name and password, then click Next.
8 Click Finish to complete the configuration.
9 Please note the additional steps to be completed once the Nano router is rebooted.
Determine Operation Mode
Wireless Router
Hotspot Router
Range Extender
Client
Access Point
To share a wired (Ethernet) connection to wireless devices, such as in a hotel room, small office, etc.
To create your personal Wi-Fi hotspot from a public Wi-Fi network such as in a hotel room, trade show, etc.
To extend the range of an existing Wi-Fi network.
To function as a wireless adapter to connect your wired device (e.g. Blu-ray® player, smart TV, or game
console) to a wireless network.
To set up a Wi-Fi network from an existing wired (Ethernet) network.
ApplicationOperation Modes
Travel
Home
Wi-Fi Info Card:
Use the default Wi-Fi Name and password
to connect wirelessly.
Description
Port
Functions as the LAN port in Hotspot Router, Range Extender,
and Access Point mode.
Functions as the WAN port in Wireless Router mode.
Power
Reset
LAN/WAN
Connects to a USB charger, power adapter or computer USB
port via the provided Micro-USB cable for power supply.
Resets the router to its factory default settings, please refer
to Frequently Asked Questions (FAQ) for instruction.
IndicationLED Status
Solid
The router is connected to the root Wi-Fi network or Internet.
Blinking
Blinking steadily: The router is disconnected from the root Wi-Fi
network or Internet.
Blinking irregularly: The router is booting or updating firmware.
Wi-Fi Name(SSID):TP-LINK_XXXX
Wi-Fi Password/PIN:XXXXXXXX
300Mbps Wireless N Nano Router
(SSID):
/PIN
802
Router Ports and LED: Using Amazon Fire TV Stick or Chromecast
when traveling:
Connect your laptop, smartphone or
tablet to the router.
Plug the HDMI streaming stick directly
into the hotel TV.
Follow the onscreen instruction to
connect to the router’s Wi-Fi.
Enjoy streaming content on the TV.
TV
TV
TV
LED
Wireless Router (Default)
Hotspot Router
If you change the default Wi-Fi name and password, you will need to reconnect your wireless
devices to the new Wi-Fi network.
If you change the default Wi-Fi name and password, you will need to reconnect your wireless
devices to the new Wi-Fi network.
Public
Wi-Fi Network
Name
TL-WR802N's
Wi-Fi Name:
TP-LINK_XXXX
A
B C
Public
Wi-Fi
TL-WR802N’s
Wi-Fi Name:
TP-LINK_XXXX
A
B C
Internet
D
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TL-WR802N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-WR802N in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TL-WR802N

TP-LINK TL-WR802N User Manual - English - 287 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info