521052

TP-LINK TL-WR1042ND Manual

1
Zoom out
Zoom in
Previous page
1/2
Next page
Hardware Connection
1
Quick Installation Guide
300Mbps Wireless N Gigabit Router
MODEL NO. TL-WR1042ND
7106504468 REV1.2.0
Package Contents
Resource CD
Ethernet Cable
Power Adapter
TL-WR1042ND
QIG
MODEL NO. TL-WR1042ND
300Mbps Wireless N Gigabit Router
3
Select your language from the drop-down menu.
Click START and
the Easy Setup Assistant will
guide you step by step to set up the Router.
4
Follow the instructions until you see the screen
below. Click FINISH to complete the setup.
1
Insert the TP-LINK Resource CD into the CD-ROM drive.
2
Select TL-WR1042ND and click Easy Setup Assistant.
3
5
Computer
Wall Socket
2
Cable/DSL Modem
POWER WPS
RESET USB INTERNET 1 2 3 4LAN
Internet
Please select your preferred conguration method:
Method 1 >> Conguration via CD Setup Wizard
For Windows users only
Method 2 >> Conguration via Web-based Quick Setup Wizard
For Mac OS/Linux users or Windows users who cannot run mini CD
Please select your preferred conguration method:
Method 1 >> Conguration via CD Setup Wizard
For Windows users only
Method 2 >> Conguration via Web-based Quick Setup Wizard
For Mac OS/Linux users or Windows users who cannot run mini CD
Power o your modem and disconnect your existing router if you have one. (If the modem has a backup battery, please remove it too.)
1
Use an Ethernet cable to connect the INTERNET port of the router to the modem’s LAN port.
2
Use another Ethernet cable to connect your computer to one of the LAN ports labeled 1/2/3/4 on your router.
Turn on your modem and wait for 2mintues. (Replace the battery if you removed it previously.)
3
4
Plug the supplied power adapter into the POWER jack to turn on the router and wait for 1 minute.
5
To use the router to share les or printers, plug an external USB hard drive, USB ash disk or USB printer to the USB port.
Please refer to Appendix 1 for more details about USB features.
Method 1 >> Conguration via CD Setup Wizard
This method is only for Windows users who can run the mini CD.
Method 2 >> Conguration via Web-based Quick Setup Wizard
This method is for Mac OS/Linux users or Windows users who cannot run the mini CD.
Open your web browser and type http://tplinklogin.net in
the address bar, then type admin both for user name and
password to log in.
1
If the login window fails
to pop up or you cannot
access the management
page after the login
window, please refer to
Troubleshooting-2.
Click Quick Setup in the main menu and click Next.
2
3
Select Auto-Detect to detect the Internet connection type and
click Next. Here we take connection type Dynamic IP for example.
4
6
Click Finish to make your settings take eect.
If Dynamic IP is detected, there will appear the MAC Clone
page. In most cases, there is no need to clone the MAC address.
You can select “No, I am...” and then click Next to continue.
5
You can rename your wireless network and create your own
password in this page. Then click Next to continue.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TL-WR1042ND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-WR1042ND in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TL-WR1042ND

TP-LINK TL-WR1042ND User Manual - English - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info