664645
2
Zoom out
Zoom in
Previous page
1/2
Next page
FAQ (Frequently Asked Questions)
Q1. What can I do if the login page does not appear?
A1. Make sure the computer is connected to the modem router properly.
A2. If the computer is set to a static or fixed IP address, change it to obtain an IP address
automatically from the modem router.
A3. Verify http://tplinkmodem.net is correctly entered in the web browser and press Enter.
A4. Use another web browser and try again.
A5. Reboot your modem router and try again.
A6. Disable and enable the active network adapter.
Q2. What can I do if I cannot access the Internet?
A1. Make sure the telephone and Ethernet cables are plugged in correctly.
A2. Try to log into the web management page of the modem router using the default
address at http://tplinkmodem.net. If you can, try the following answers. If you cannot,
change your computer to obtain an IP address automatically from the modem router.
A3. Consult your ISP and make sure all the VPI/VCI, WAN Link Type, account username and
password are correct. If they are not, please replace them with the correct settings and
try again.
A4. Restore the modem router to its factory default settings and reconfigure the modem
router by following the instructions in this Quick Installation Guide.
A5. Please contact our Technical Support if the problem still exists.
Q3. How do I restore the modem router to its factory default settings?
Q5. What can I do if the ADSL LED does not turn solid on?
A1. Check your cables and make sure they are all plugged in correctly, including the
telephone lines and power adapter.
A2. Manually change your DSL settings. Log into the modem routers web management
page. Go to Advanced Setup > DSL, untick all the modulation options except G.dmt
Enabled, ADSL 2 Enabled and AnnexL Enabled and click Save/Apply.
A3. Restore your modem router to its factory default settings by referring to FAQ > Q3.
A4. Remove the ADSL splitter, directly connect the modem router to the phone jack and
then reconfigure the modem router by following the instructions in this Quick
Installation Guide.
A5. Contact your Internet service provider to verify if the ADSL line is in good status.
A6. Please contact our Technical Support if the problem still exists.
Q4. What can I do if I forget my password?
Web Management page password:
Refer to FAQ > Q3 to reset the modem router, and then use admin (all lowercase) for both
username and password to log in.
Wireless Network password:
A1. The default Wireless Password/PIN is printed on the product label of the modem router.
A2. If the default wireless password has been changed, log into the modem router's web
management page and go to Wireless > Security to retrieve or reset your wireless
network password (also called WPA/WAPI passphrase).
A1. With the modem router powered on, press
and hold down the WPS/RESET button on the
rear panel of the modem router for more than
5 seconds and then release it. If all LEDs turn
on momentarily, you restore the modem
router successfully.
WPS/RESET Button
Press & Hold for more than 5 seconds
Configuring the Modem Router
Wireless
a. Find the SSID (network name) and
Wireless Password printed on the
product label at the bottom of the
modem router.
1. Connecting your computer to the modem router (Wired
or Wireless).
Wired
Ethernet cable
A2. Log into the web management page of the
modem router, and go to Management >
Settings > Restore Default, click Restore
Default Settings and wait until the reset
process is complete.
E
Notes:
1) All the Internet settings in the figure below are used for demonstration only. If you are unsure of the
Internet settings, please contact your ISP.
2) Per FCC regulations, all Wi-Fi products marketed in the U.S. must be fixed to the U.S. region only.
Verify or change the Wireless settings (wireless network settings) and click Next to
continue.
D
Check all the parameters and click Confirm to complete the configuration.
Note: You may personalize your wireless network name and key. Once done, you will have to reconnect to
your Wi-Fi network using the new wireless network name and key.
Quick Setup - WAN Configurations
OtherCountry:
ISP: Other
WAN Link Type:
PPPoE
35VPI/VCI: 8 ([0~255] / [32~65535])
XXXXXXXXXXX
PPP Username:
*************
PPP Password:
Encapsulation Mode:
LLC/SNAP-BRIDGING
(optional)
1480
MTU (bytes):
(optional)
PPPoE Service Name:
(optional)
Back Skip WAN
Next
/
Quick Setup - Wireless Configurations
TP-LINK_XXXXWireless Network Name :
Network Authentication:
WPA2-Personal
Wireless Network Key : ********
Enable Wireless:
Back Skip Wi-Fi
Next
(Also called SSID)
Click Quick Setup from the menu and click Next to continue, then select ADSL WAN
and click Next.
B
C Select your Country and ISP from the drop-down list. Complete the WAN settings
with the information provided by your ISP and click Next. Here we use PPPoE for
demonstration.
Quick Setup - WAN Configurations
Skip WAN
Next
Choose WAN Type:
For ADSL(Telephone line/RJ11) Service
For Ethernet(RJ45) ServiceEthernet WAN
ADSL WAN
Enable IPv6 for this service
2. Configuring the modem router via a web browser.
Please consult your ISP (Internet Service Provider) for the following information
before configuring the modem router.
VPI and VCI: _______ WAN Link Type: _______
Encapsulation Mode (optional): _____________
If your WAN Link Type is PPPoE/PPPoA, please get further information of your
account username and password.
Enter http://tplinkmodem.net or 192.168.1.1 in the address bar of a web
browser. Use admin for both username and password, and then click Login.
A
Note: If the login window does not appear, please refer to FAQ > Q1.
http://tplinkmodem.net
Login
admin
admin
POWER
ON/OFF
WiFi
WPS/
RESET
LAN4
LAN1LAN3 LAN2
ADSL
b. Click the network icon of your computer or go to Wi-Fi Setting of your smart
device, then select the SSID to join the network.
7106506218 REV6.0.2
©2016 TP-LINK
Connect a computer to the modem router and the LAN LED lights up.
Connections are available
Wireless Network Connection
Connect automatically Connect
TP-LINK_XXXX
Wi-Fi
Wi-Fi
TP-LINK_XXXX
CHOOSE A NETWORK...
Other...
Computer
Smart Device
OR
< Settings
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TD-W8950N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TD-W8950N in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TD-W8950N

TP-LINK TD-W8950N User Manual - English - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info