664723
2
Zoom out
Zoom in
Previous page
1/2
Next page
WPS is an easier way to extend your host network. You are recommended to use this method if your host router has a WPS button.
The button might look like one of these: . Otherwise, please refer to Option ONE.
Entertainment Adapter
The extender can be used as a wireless adapter to connect any
Ethernet-only device such as a Blu-ray player, game console, DVR, or
smart TV to your Wi-Fi network.
First, connect the extender to your router using Option ONE or Option
TWO. Then connect your Ethernet-only device to the extender via an
Ethernet cable.
TP-LINK Tether App
Tether provides a simple, intuitive way to access and manage your extender
with your iOS or Android devices.
Tether
1. Download the Tether app from the App Store or Google Play.
2. Ensure your device is wirelessly connected to the extender or to the host
router.
3. Launch the app and start managing your extended network.
How to
begin?
Scan to download
Enjoy!
Option TWO
Quick Setup Using the WPS Button
Smart TV Game Console Desktop
Router
Ethernet Connection
©2017 TP-Link
For technical support and other information, please visit
http://www.tp-link.com/support
TP-Link hereby declares that this device is in compliance with the essential requirements and other relevant provisions of directives
2014/53/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce.
Both extended networks share the same wireless network names (SSIDs) and passwords as those of your host networks.
Plug the extender into an electrical outlet about halfway
between your router and the Wi-Fi dead zone. The
location you choose must be within the range of your
host network.
Wait until the LED is lit and solid blue. If not, relocate it
closer to the router to achieve better signal quality.
1
2
Relocate
Plug the extender into an electrical outlet
near your router, and wait until the POWER
LED is lit and solid blue.
Power On
Connect
Press the WPS button on your router, and then press the button on the extender within 2
minutes.
1
2
If you are connecting the extender to a dual-band router but only or LED is on, repeat
Step 1 to connect the other band.
1. For more information about using WPS on your router, please refer to the router manufacturer's user guide.
2. Some ISP gateways disable the WPS function by default. If the WPS method fails, please refer to Option ONE.
Q3. What should I do if the LED does not change to solid after
completing Option ONE?
Frequently Asked Questions (FAQ)
Q4. How do I restore the extender to its factory default settings?
Q2. What should I do when the LED is on, but only one
band is connected?
Q1. What should I do if I cannot access the extender’s web
management page?
It depends on your router’s capabilities. If you are connecting to a dual-band router but only
2.4GHz or 5GHz LED is on, press the WPS button on the router and on the extender again to
connect the other band.
If your computer is wirelessly connected, make sure that you have connected to the extender’s
SSID.
If your computer is connected via an Ethernet cable, please make sure that the connection is
stable.
Make sure your computer is set to obtain an IP address and DNS server address automatically.
Verify that http://tplinkrepeater.net or http://192.168.0.254 is correctly entered in the web
browser and press Enter.
With the extender powered on, use a pin to press and hold the Reset button until all the LEDs
turn on momentarily, and then release the button.
Red
Too far away
Blue
Ideal location
Host Network
Host Network
Extended Network
The LED should change
from blinking to a solid state,
indicating a successful WPS
connection.
If not, please use Option ONE.
Block unwelcome devicesTurn on/o the LEDs
Modify wireless settingsSetup the extender
You may have entered the incorrect Wi-Fi passwords of your host networks during the
conguration. Please log in to the extender's web management page to check the password
and try again.
If the LED still doesn’t change to solid, please reset the extender and go through the
conguration again.
For more instructions, please visit www.tp-link.com and refer to the extender’s User Guide.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK RE650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK RE650 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK RE650

TP-LINK RE650 User Manual - English - 41 pages

TP-LINK RE650 Quick start guide - All languages - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info