664743
2
Zoom out
Zoom in
Previous page
1/2
Next page
Using WPS is an easier way to extend your host network. You are recommended to use this method if your host
router has the WPS button. The button might look like one of these: . If not, please refer to Method ONE.
WPS
Q3. What should I do if the LED does not change to solid after completing
Method ONE?
· You may have entered the incorrect Wi-Fi password of your host network during the configuration. Please
log into the extender's web-based interface to check the password and try again.
· Reset the extender and go through the configuration again.
Q4. I have enabled a wireless MAC filter, wireless access control, or access
control list (ACL) on my host router. What should I do before configuring and
using the extender?
·
If you have enabled those functions of your host router, you may need to disable them first. And
then follow Method ONE or Method TWO to complete the configuration.
For details, please refer to the Troubleshooting of the User Guide on the support page at
www.tp-link.com.
The extender can be used as a wireless adapter to connect any Ethernet-only device
(such as a Blu-ray player, game console, DVR, or smart TV) to your Wi-Fi network.
First, connect the extender to your router referring to Method ONE or Method TWO,
then connect the extender to your Ethernet-only device via an Ethernet cable.
Entertainment Adapter
TP-LINK Tether app provides a simple, intuitive way to access, manage your extender
using your iOS or Android devices.
1. Scan the QR code or search the keywords “TP-LINK Tether” to
download the app from the App Store or Play Store.
2. Ensure your smart device is wirelessly connected to the extender.
3. Launch the app and start managing your extended network.
Block network access
from specific devices
Turn off LEDs
at a specific time
Change the basic
extended network settings
Do initial configuration
of your extender
TP-LINK Tether App
Tether
How to
begin?
Using WPS (Wi-Fi Protected Setup)
Method TWO
Smart TV
Game Console
Desktop
Router
Both extended networks share the same SSIDs (network names) and passwords as those of your host networks.
Enjoy!
Plug the extender into an electrical outlet
near your router.
Power On
Connect
Relocate
Q1. Why doesn’t the login page appear after entering http://tplinkrepeater.net?
· If your computer is wirelessly connected, please verify that you have connected to
the extender’s
SSID
. If your computer is connected via an Ethernet cable, please verify that the connection is stable.
· Make sure your computer is set to obtain an IP address automatically.
· Use the IP address to log in to the page. The default IP is 192.168.0.254. If the extender is connected
to the host router, please go to the router’s DHCP client list to obtain the extender’s current IP address.
· Please reset the extender and try again.
If the problem still exists, please refer to the FAQs (NO.931&NO.504) at www.tp-link.com for detailed
instructions.
Q2. How do I restore the extender to its factory default settings?
· While the extender is powered on, press and hold the Reset button until all the LEDs turn on
momentarily.
Frequently Asked Questions (FAQ)
Press the WPS button on your router, and then press the button on the extender.
1
WPS
Press
2
If you are connecting the extender to a dual-band router but only or
LED is on, repeat step 1 again to connect the other band.
1. Some ISP gateways disable the WPS function by default. If the WPS connection fails, please use Method ONE.
2. For more information about using WPS on your router, please refer to the router manufacturer's user guide.
Wait until the Power LED
changes to solid blue.
Red
Too far away
Blue
Ideal location
Extended NetworkHost Network
Host Router Extender
Clients
The LED should change
from blinking to a solid state,
indicating a successful WPS
connection.
If not, please use Method ONE.
Plug the extender into an electrical outlet between your router
(Host Network) and the Wi-Fi “dead” zone. The location you
choose must be within the range of your existing host network.
Wait until the LED is lit and solid blue. If not, relocate it closer
to the router to achieve a good (or better) signal quality.
1
2
Note: The AP mode of the extender is not supported by Tether.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK RE350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK RE350 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK RE350

TP-LINK RE350 User Manual - English - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info