727870

TP-LINK RE300 - AC1200 Wi-Fi Range Extender Manual

1
Zoom out
Zoom in
Previous page
1/2
Next page
Quick Installation Guide
©2018 TP-Link
7106508139 REV1.0.0
Power On
1
Set Up
2
Method 3: Via the WPS Button
1. Press the WPS button on your router.
The WPS button might
look like one of these:
Method 2: Via a Web Browser
1. Connect your computer or smartphone to the
extender’s network TP-Link_Extender. If you are
using a computer, unplug the Ethernet cable if any.
Method 1: Via the Tether App
1. Get the up-to-date Tether app.
2. Connect your smartphone to the extender’s
network TP-Link_Extender.
3. Launch the Tether app, and select your extender.
Create a password to log in.
Scan for Tether Tether
or
Range Extender
RE300
Blinking Solid On
Note: If the LED does not turn solid on, try again or use Method 1
or 2.
2. Within 2 minutes, press the WPS button on the
extender for 1 second. The LED should change
from blinking to solid on, indicating successful
connection.
3. If the extender connects to a dual band router,
repeat steps 1 and 2 above to connect to the
other band.
Need setup videos?
Scan the QR code, or visit
https://www.tp-link.com/download/RE300.html
2. Launch a web browser, and enter
http://tplinkrepeater.net or http://192.168.0.254
in the address bar. Create a password to log in.
Note: If the login window does not appear, refer to FAQ > Q1.
http://tplinkrepeater.net
Start
Conrm Password
Create Password
Low Middle High
Extended Network Names:
Router’s network name with
_EXT
at the end
Passwords:
Same as your router
Note:
If you want to change the extended network
names, refer to Manage the Extender on the back
page.
Next to
Connections are available
Wireless Network Connection
Connect automatically Connect
√
TP-Link_Extender
Wi-Fi
Wi-Fi
TP-Link_Extender
CHOOSE A NETWORK...
Other...
< Settings
My Devices
Local Device
REXXX
XX-XX-XX-XX-XX-XX
4. Follow app instructions to complete the setup.
Note: If the LED does not turn solid on, refer to FAQ > Q2.
The LED should turn solid on, indicating
successful connection to your router.
Solid On
3. Follow web instructions to complete the setup.
Note: If the LED does not turn solid on, refer to FAQ > Q2.
The LED should turn solid on, indicating
successful connection to your router.
Solid On
Relocate
3
1. Plug in the extender about halfway between your router and the Wi-Fi dead
zone. The location you choose must be within the range of your router.
2. Wait for about 2 minutes until the LED turns solid white. If it doesn't, relocate
the extender closer to the router to achieve better signal quality.
Router Devices
Halfway
White: Suitable location
Red: Too far from router
Enjoy the internet!
Tip: For more intuitive location assistant, access extender settings via the Tether app and go to Tools > Location Assistant.
Solid On
If you cannot find the network names with _EXT in
your Wi-Fi network list, this means that the extender
has been connected to a OneMesh router and
automatically copied its Wi-Fi settings. See back for
more information.
Solid On
Plug the extender into a power outlet next to your router. Wait until its
Power LED turns solid on.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK RE300 - AC1200 Wi-Fi Range Extender at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK RE300 - AC1200 Wi-Fi Range Extender in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK RE300 - AC1200 Wi-Fi Range Extender

TP-LINK RE300 - AC1200 Wi-Fi Range Extender User Manual - English - 51 pages

TP-LINK RE300 - AC1200 Wi-Fi Range Extender Quick start guide - All languages - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info