664745
1
Zoom out
Zoom in
Previous page
1/2
Next page
Antenna
Position the antenna vertically for optimal performance.
LED Indicators
2.4G Green: The 2.4GHz network is configured.
Flashing green: The extender is in SoftAP mode.
Off: The 2.4GHz network is not configured.
5G Green: The 5GHz network is configured.
Flashing green: The extender is in SoftAP mode.
Off: The 5GHz network is not configured.
Status Green: The extender is connected and in a good signal location.
Red: The extender is connected, but in a poor signal location.
Flashing green: Configuring or when the extender is disconnected from
your router.
Flashing amber and green: When pressing the Reset button for 5
seconds to reset the Wi-Fi settings and enter SoftAP mode.
Flashing amber rapidly: When pressing the Reset button for 10 seconds
to factory reset the extender.
Off: No active connection.
Power Green: The extender is plugged into an active power outlet.
Flashing green: Initializing.
Flashing green rapidly: Upgrading firmware.
LED ON/OFF Button
Press to turn all LEDs ON or OFF.
Reset Button
Press and hold for about 5 seconds or until the Status LED starts flashing
amber and green to reset the Wi-Fi settings and enter SoftAP mode.
Press and hold for about 10 seconds or until the Status LED starts flashing
amber rapidly to reset the extender to factory defaults.
Socket ON/OFF Button
Press to turn the Smart Plug and its LED ON or OFF.
Smart Plug
Plug in your electronic devices and small appliances, and control them from
the Kasa app.
Note: The input voltage should be consistent with the output voltage of the power outlet.
Gigabit Ethernet Port
Connect Ethernet-only (wired) devices such as Smart TVs, Blu-ray players, and
game consoles to your wireless network with Ethernet cables.
Wi-Fi Extender+
Support
Visit www.tp-link.com/support for technical support and troubleshooting
information.
© 2017 TP-Link. All rights reserved.
Specications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd.
App Store is a trademark of Apple Inc.
Google Play is a trademark of Google Inc.
www.tp-link.com
DESIGNED IN CALIFORNIA. MANUFACTURED IN CHINA.
Setting Up Wi-Fi Extender+ via Kasa
Main Router Main Router’s SSIDs Extended SSIDs
2.4GHz Single-Band MyHome 2.4GHz: MyHome_EXT
5GHz: MyHome_5GEXT
5GHz Single-Band MyHome 2.4GHz:MyHome_2GEXT
5GHz: MyHome_EXT
Dual-Band MyHome_1 2.4GHz: MyHome_1_EXT
MyHome_2 5GHz: MyHome_2_EXT
7106507556 REV 1.1.1
OR
KasaScan QR Code
Quick Start Guide
RE270K / RE370K
1 Download Kasa for Mobile from the App Store or Google Play.
2 Connect your mobile device to your Wi-Fi network.
3 Launch Kasa and follow the in-app instructions to expand your Wi-Fi network.
4 Connect your Wi-Fi devices to the new extended network using the same
password as the main network.
The extended network names are your main network names (SSIDs) with _EXT
or _2GEXT or _5GEXT as a sufx, depending on whether the extender is
connecting to the single-band or dual-band router. For example:
1
1
5
7
2
3
4
5
6
7
2
3
64
2
3
DONE
Great!
Your extended dual-band
networks are
MyHome_1_EXT
MyHome_2_EXT
The network passwords have been
inherited from your home network’s.
9:41 AM 100%
Power up
NEXT
Pull up the antenna on your
Wi-Fi Extender+. Then, plug in your
extender to power it up.
9:41 AM 100%
Check Wi-Fi lights
Wait about 20 seconds until both
your 2.4G and 5G LED lights are
blinking green.
NEXT
My Wi-Fi lights are off
2.4G
5G
Status
AC750/AC1200
Wi-Fi Range Extender
with Smart Plug
* Hereafter referred to as Wi-Fi Extender+
Note: RE270K (U.S. version) is used for demonstration in this
Quick Start Guide. Images may differ from actual products.
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU. The original EU
declaration of conformity may be found at http://www.tp-link.com/en/ce.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK RE270K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK RE270K in the language / languages: English as an attachment in your email.

The manual is 4,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK RE270K

TP-LINK RE270K User Manual - English - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info