●
Position the belt so that the seam is located in the middle of the plate.
●
Insert the spray valve in the spray head of the lubricant container.
●
Lift the belt at one side and hold the spray valve in a distance to the front end of striding
belt and plate. Start at the front end of the belt. Lead the spray valve in direction of the
back
end. Repeat this process on the other side of the belt. Spray each side for about 4
seconds.
●
Wait 1 minute to let the silicon spray spread, before starting the machine.
CLEANING:
Regular cleaning of the striding belt ensures a long product life.
●
Warning: The treadmill must be turned off to avoid electrical shocks. The power cord
must be pulled out of the socket, before starting the cleaning or maintenance.
●After each training:
Wipe the console and other surfaces with a clean soft and damp
cloth to remove sweat residues.
Caution:
Do not use any abrasives or solvents. To avoid damage to the computer, keep
any
liquids away. Do not expose the computer to direct sunlight.
●Weekly:
To make the cleaning easier it is recommended to use a mat for the treadmill.
Shoes can leave dirt on the striding belt that can fall beneath the treadmill. Clean the mat
under the treadmill once a week.
STORAGE:
Store you treadmill in a clean and dry environment. Ensure the master power switch is off
and is un-plugged from the electrical wall outlet.
