737836
21
Zoom out
Zoom in
Previous page
1/23
Next page
4.
Be careful not to tighten the running belt tension too much as you can create
Excessive pressure on the front and rear roller bearings. An excessively tightened running
belt
may damage the roller bearings that would result in bearing noise from the front and
rear
rollers.
TO DECREASE THE TENSION ON THE RUNNING BELT, TURN BOTH BOLTS
COUNTER-CLOCKWISE THE SAME NUMBER OF TRUNS.
CENTRING THE RUNNING BELT
When you run, you may push off harder with one foot than with another. The severity of
the
deflection depends on the amount of force4 that one foot exerts in the relation to the
other.
This deflection can cause the belt to move off- centre. This deflection is normal and
the
running belt will centre when no body is on the running belt. If the running belt remains
consistently off-centre, you will need to centre the running belt manually.
Start the treadmill without anyone on the running belt, press FAST-key until speed
reached
6kph.
1.
Observe whether the running belt is toward the right or left side of the deck.
●If toward the left side of the deck, using wrench, turn the left adjustment bolt clockwise
1/4
turn and the left adjustment bolt counter clockwise 1/4.
If toward the right side of the deck, turn the right adjustment bolt clockwise 1/4 turn and
the left adjustment bolt counter clockwise 1/4.
If the belt is still not centre, repeat the above step until the running belt is on centre.
2.
After the belt is centre, increase the speed to 16kph and verify that it is running
smoothly. Repeat the above steps if it is necessary.
If the above procedure is unsuccessful in
resolving the off-centre, you may need to
increase the belt tension.
LUBRICATION
The treadmill is factory-lubricated. However, it is recommended to check the lubrication of
the
treadmill regularly, to ensure an optimal operation of the treadmill. It is usually not
necessary to lubricate the treadmill in the first year or the first 500 hours of operation.
After every 3 months of operation, lift the sides of the treadmill and feel the surface of the
belt, as far as possible. If traces of silicon spray are found, lubrication is not necessary.
In case of a dry surface refer to the following instructions.
Only use oil free silicon spray.
Application of lubricant on the belt:
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toorx TRX-200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toorx TRX-200 in the language / languages: English as an attachment in your email.

The manual is 4,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toorx TRX-200

Toorx TRX-200 User Manual - German - 20 pages

Toorx TRX-200 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info