Toledo 49
GRIP
The use of the belt sander is made easier because of the
two grips one on the front side and one on the back.
Through that you can hold the machine with two hands,
you have a better control of the machine and there is less
risk to becoming in touch with the moving parts. Hold
the belt sander always with both hands.
OPERATING INSTRUCTIONS
Make sure that the machine has reached its full speed
before placing the machine on the work piece. This will
prevent an overload of the machine.
For sanding wood, place the machine approximately 15°
out of the grains of the wood. Move the belt sander conti-
nuous over the work piece.
TROUBLESHOOTING
In case the belt sander does not work well, we give you
some possible causes and solutions.
The electromotor gets hot
• The cool ventilation slots in the motor are stopped
up with dirt.
Clean the cool ventilation slots.
• The motor is defect.
Have your belt sander repaired or checked by your
local Toledo dealer.
The connected machine does not work
• Interruption in the mains connection.
Check mains connection for fracture.
Have your belt sander repaired or checked by your
local Toledo dealer.
The dust is not absorbed
• This can be caused by a stopped up dust extraction
Clean your dust collection opening
Repairing of electric appliances may be carried out
only by experts.
MAINTENANCE
Make sure that the machine is not live when car-
rying out maintenance work on the motor.
The Toledo machines have been designed to operate
over a long period of time with a minimum of mainte-
nance. Continuous satisfactory operation depends upon
proper machine care and regular cleaning.
Cleaning
Keep the ventilation slots of the machine clean to pre-
vent overheating of the motor.
Regularly clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation slots free
from dust and dirt.
If the dirt does not come off use a soft cloth moistened
with soapy water. Never use solvents such as petrol,
alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please con-
tact your local Toledo dealer.
In the back of this manual you find an exploded view
showing the parts that can be ordered.
ENVIRONMENT
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these
materials to the appropriate recycling locations.
Take your unwanted machines to your local Toledo-
dealer. Here they will be disposed of in an environmen-
tally safe way.
4 Toledo
