This universal remote control is compatible with most television sets controlled by infra-red.
This remote control was programmed in the factory, so that you can use it to control most of
the sets of the THOMSON group’s make. For this reason, we recommend that prior to
attempting to programme the remote control, you try it out by means of one of the methods
described in this user manual. However, first of all, you must install 2 batteries (AAA) in the
remote control.
Please keep this guide along with the code list (provided separately), so that you can
subsequently programme your remote control for use with other sets.
1Indicator light: the red indicator light is lit whenever
a key is pressed.
2On/Standby or Standby only, depending on the
equipment being used.
3Zapping and volume control.
4Mute.
5Return to channel 1.
6“Info” key.
7External TV/VIDEO sources (AV connectors).
Note:
depending on the actual devices, manufacturers
and year of manufacture, the functions available will
vary.
The keys
Code entry
Direct code input
To directly input the code read from the list:
1. Switch your TV set on.
2. On page II of the separate code list enclosed, find
the codes matching the make of the TV set which you
want to control.
3. Hold down keys and
B
B
until the red indicator
lamp remains lit.
4. While the indicator lamp is on, with the keys
PROG+ (1st number),
PROG- (2nd number),
VOL+ (3rd number),
and VOL- (4th number), enter the 4-digit code.
EXAMPLE:
To enter code 0027, do not press the keys
PROG+and PROG-, press VOL+twice and
VOL-seven times. The red indicator lamp flashes
whenever a key is pressed.
5.To save the code, press key . The red indicator
lamp goes off.
Should the code entered not be on the list, the red
indicator lamp flashes rapidly during 3 seconds and
then goes off.
6.Code check: Direct the remote control towards the
TV set and try to switch it over to standby by simply
pressing the key
B
B
.
1. Switch your TV set on.
2. Hold down keys and
B
B
until the red indicator
lamp remains lit.
3. Direct the remote control towards the TV set and try
to switch it off by simply pressing the key
B
B
. Should
the set not switch off, press
B
B
as many times as
required (up to 200 times), until the set switches off.
Between two subsequent key depressions, give the
red indicator lamp enough time to extinguish and
light
up again
(about
1 second). Proceeding this
way will enable you to see whether the set responds
or not.
4. Immediately after the TV set switches over to
standby, press key to store the programming.
The red indicator lamp goes off.
To retrieve the code stored in your remote control:
1. Hold down keys and
B
B
until the red indicator
lamp remains lit.
2. Press key VOL-.
3. To visualise the first code digit, press PROG+and
count the flash pulses of the red indicator lamp.
The digit “0” does not generate any flash pulse.
4. For the second code digit, press key PROG-and
count the flash pulses of the red indicator lamp.
5. For the third code digit, press key VOL+ and count
the flash pulses of the red indicator lamp.
6. For the fourth code digit, press key VOL- and count
the flash pulses of the red indicator lamp. The
indicator lamp extinguishes after the last flash.
When you have retrieved the code of your
set, jot it down so that you can use it
whenever needed.
After battery replacement, you’ll have to
programme the remote control again.
Automatic code retrieval
Retrieval of the code stored
in your remote control
ROCZ407 / GB - bj - XX / aws - rst / 01-2007
TV CODE
This symbol means that your inoperative
electronic appliance must be collected
separately and not mixed with the
household waste • The European Union
has implemented a specific collection and
recycling system for which producers are responsible
• This appliance has been designed and manufactured
with high quality materials and components that can be
recycled and reused • Electrical and electronic
appliances are liable to contain parts that are
necessary in order for the system to work properly but
which can become a health and environmental hazard
if they are not handled or disposed of in the proper
way • Consequently, please do not throw out your
inoperative appliance with the household waste • If you
are the owner of the appliance, you must deposit it at
the appropriate local collection point or leave it with the
vendor when buying a new appliance • If you are a
professional user, please follow your supplier’s
instructions • If the appliance is rented to you or left in
your care, please contact your service provider • Help
us protect the environment in which we live !
Yo u can contact THOMSON by dialling:
0871 500 0520
(call to this number
will be charged at 10 pence per minute)
http://www.thomsonlink.com
MAJ_29/11/2006
F01_GB_ROCZ407.qxp 5/02/07 11:11 Page 1
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Thomson ROCZ407 TV Zapper at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Thomson ROCZ407 TV Zapper in the language / languages: English as an attachment in your email.
The manual is 0,09 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
