742909
3
Zoom out
Zoom in
Previous page
1/177
Next page
User Guide
II
Safety Guidelines
Observe the following safety guidelines to ensure your own personal safety and to help protect your
system from potential damage.
Basic Requirements
1. Keep the device strictly dry while storing, shipping and using;
2. Keep the device from fierce collision;
3. Follow the instructions provided in this manual to install the device;
4. Please contact the specified maintenance staff rather than remove the device on your own if any fault
happens.
Environmental Requirements
1. Temperature - Install the switch in a dry area, with ambient temperature between 0 and 40ºC (32 and
104ºF). Keep the switch away from heat sources such as direct sunlight, warm air exhausts, hot-air
vents, and heaters;
2. Operating humidity - The installation location should have a maximum relative humidity of 90%,
non-condensing;
3. Ventilation - Do not restrict airflow by covering or obstructing air inlets on the sides of the switch. Keep it
at least 10cm free on all sides for cooling. Be sure there is adequate airflow in the room or wiring closet
where the switch is installed;
4. Operating conditions - Keep the switch away from nearest source of electromagnetic noise, such as
photocopy machines, microwaves, cellphones, etc.
Use Notes
1. Use the provided accessories, such as the cable, mounting kit, etc;
2. Ensure the basic supply voltage standard must be met;
3. Keep the power plug clean and dry in case of electric shock or other dangers;
4. Keep your hands dry while plugging cables;
5. Shut down the device and power it off before plugging cables;
6. Disconnect the power supply and pull out all cables, such as the power cord, fiber, Ethernet cable, etc.
in lightening days;
7. Disconnect the power supply and pull out the plug if the device is out of use for a long time;
8. Keep the device far from water or other liquids;
9. Contact the specified maintenance staff if any problem occurs;
10. Do not tread on, drag or excessively bend its cable;
11. Do not use worn or aged cables;
12. Do not look the fiber interface in your eyes in case of eye damage;
14. Prevent some matters, such as metals, from entering the device through the ventilation hole;
15. Do not scrape or fray the device’s housing shell in case of abnormal operation or human body allergic;
16. Keep the device out of children’s reaches.
Cleaning Notes
1. Shut down the device and pull out all cables before cleaning it;
2. Use soft cloth to clean the devices housing shell.
Environmental Protection
1. Throw the discarded device or batteries into the specified recycling places;
2. Observe local relevant packages, wasted batteries and discarded device processing acts and support
recycling action.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda TEG3224P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEG3224P in the language / languages: English as an attachment in your email.

The manual is 8,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info