Manual Tecomec Super Jolly (page 7 of 112) (All languages)

640523

Zoom out

Zoom in

1/112

1. SAFETY:

ATTENTION! When you use electrical appliances, you should always

observe basic safety precautions to reduce the risk of re, electric shocks

and personal injuries.

- Do not leave the appliance out in the rain.

- Do not use the appliance in damp or wet places.

- Keep the work area well lit.

- Do not use the appliance near ammable liquids or gas.

- Make sure the voltage and the frequency written on the rating nameplate match

those of the mains.

- Make sure the switch is turned off (pos. 0) before you plug the appliance into the

mains to prevent it from starting up accidentally.

- Unplug the appliance from the mains when it is not in use, before you start any

maintenance jobs and when you replace any accessories (i.e. grinding wheel).

- Before you actually use the appliance, make sure it is able to work appropriately

and efciently: check the integrity of the shield guard in particular.

- Check the alignment and adherence of moving parts, make sure nothing is broken,

check the overall assembly and any other conditions that may affect operation.

- The grinding wheel safety guards and any other parts damaged shall be repaired

or replaced by a skilled technician, unless specied otherwise in this manual.

- Have faulty switches replaced by a skilled technician.

- Keep anyone that is not involved in the job well away from the work area, especially

children. Do not let them touch the appliance or the extension lead.

- Wear safety goggles and gloves.

- Wear a face mask or dust mask if the process creates dust.

- Do not wear baggy clothing or jewelry, which could get caught up in moving parts.

- Wear a protection cap and tie long hair back.

- Wear non-slip shoes when working outdoors.

- Always stand appropriately and balanced on both feet.

- Always keep your eyes on the job, without distraction. Use your common sense

and do not use the appliance if you are tired.

- Always make sure the hex spanners have been taken off the appliance before using it.

- Keep the work area clean and tidy. Untidy work areas and benches could cause

accidents.

- Do not touch earthed surfaces with any part of your body.

- Always use the vise to rmly hold the chain to be sharpened. Never sharpen the

chain while holding it with your hands.

- Do not force the appliance to work at a higher speed than that envisaged.

- Never stop the grinding wheel with your hands, even after the motor has been

switched off.

- When using the appliance outdoors, use extension leads approved for such use

and marked accordingly.

- Never pull on the power cable to unplug the appliance from the mains. Keep the

cable away from heat, oil and sharp edges.

- Do not use the appliance if the switch does not switch on or off.

- The use of accessories (i.e. grinding wheel) different from those recommended by

the manufacturer could cause injuries.

- Do not tamper with the safety devices.

- Look after the appliance with care.

- Follow the instructions when replacing accessories.

- Every now and again, visually check the appliance cable and have it repaired by a

specialist if you should notice any damages.

- Every now and again, visually check the extension leads and replace them if

damaged.

- Keep the operating handles dry, clean and free from oil and grease.

- When the appliance is not used, keep it in a dry and safe place away from children’s

reach.

- This electrical appliance complies with related safety provisions. Repairs shall be

carried out exclusively by a skilled technician, using exclusively OEM spare parts,

otherwise whoever uses the appliance could be in serious danger.

2. GENERAL INFORMATION

The manufacturer is not liable for damages in the following cases:

- failed observance of the instructions given herein;

- use of the appliance other than that described in the “INTENDED USE” section;

- failed use in compliance with current standards on Health & Safety at the workplace;

- Incorrect installation;

- lack of scheduled maintenance;

- modications or jobs that are not authorized by the manufacturer;

- use of non-original or inadequate spare parts;

- repairs that are not carried out by a specialist.

3. WARRANTY

The warranty validity is that acknowledged in the country of sale. Claims under

warranty will only be accepted if they are backed-up by the copy of the purchase

document (bill or receipt).

The guarantee becomes void if:

a) the appliance has been tampered with;

b) the appliance has not been used according to this manual;

c) non-original parts, appliances or grinding wheels have been tted on the grinder

or other parts that are not authorized by the manufacturer;

d) the appliance has been powered at a voltage or frequency different from that

written in the rating nameplate.

4. USING AND KEEPING UP THE OWNER’S MANUAL

The characteristics and the information given in this manual are merely indicative. The

manufacturer reserves the right to add any modications to the grinder considered

necessary at any time.

It is forbidden to reproduce any part of this document without authorization on behalf

of the manufacturer.

The owner’s manual is integral part of the appliance and must be kept in a safe place

so that it can be consulted whenever need be.

If you should loose your manual or it should deteriorate, you can request your dealer

or an authorized service centre for another copy.

The manual shall accompany the appliance at all times, especially if it is sold on at

a later date.

5. DEFINITIONS

Skilled technician: a person who is generally employed by the service centre and who

is trained to carry out extraordinary maintenance jobs and repairs on the appliance.

6. SYMBOLS

This symbol points out the possibility of serious personal injuries if the

provisions and instructions are not complied with.

This symbol points out that the user must wear protection goggles when

he uses the appliance.

This symbol points out that the user must wear protective gloves when

he uses the appliance.

This symbol points out the correct running direction of the appliance

(grinding wheel).

7. TECHNICAL DATA

Model Super Jolly

Voltage 230V~ 50Hz

Rated power 214W

Grinding wheel dimensions

Outside Ø 145 mm - Inside Ø 22,2 mm

Thickness: 3.2 - 4.7 - 8.0 mm

Maximum speed of grinding wheel 2800 min

-1

Max. power of lamp 15W

Acoustic pressure level 79 dB(A)

Level of vibrations on operating

handle (*)

< 2,5 m/s

Types of chains that can be

sharpened

1/4” - .325” - 3/8” - .404” - 3/4”

Weight (complete machine) 7,7 kg

(*) - The declared vibration total value has been measured in accordance with a

standard test method and may be used for comparing one tool with another.

- The declared vibration total value may also be used in a preliminary

assessment of exposure.

- the vibration emission during actual use of the power tool can

differ from the declared total value depending on the ways in

which the tool is used; and of the need to identify safety measures

to protect the operator that are based on an estimation of

exposure in the actual conditions of use (taking account of all parts

of the operating cycle such as the times when the tool is switched

off and when it is running idle in addition to the trigger time).

8. PART DESCRIPTION (FIG.1)

1 Base unit 11 Arm operating handle

2 Arm-motor unit 12 Shield guard

3 Vise assembly 13 Supplementary plastic arbor guard

4 Chain gauge setting knob 14 Grinding wheel

5 Vise adjustment knob 15 Sharpening depth setting knob

6 Chain jaws 17 Lamp

7 Chain blocking unit adjustment knob 18 Main ON/OFF switch

8 Chain blocking unit adjustment knob 19 Electrical power cable

9 Chain blocking unit 20 Rating nameplate

10 Arm blocking handle

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tecomec Super Jolly in the language / languages: All languages as an attachment in your email.

The manual is 12,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tecomec Super Jolly Manual

Product: